Searching...
 
 
Location & Directions 303.798.5033
Mon - Fri: 10:00am - 7:00pm
Sat: 10:00am - 5:00pm
Sun: 11:00am - 4:00pm
 
 
 
 
 

Refine By

Brands

+ more brands

Size

VisaMasterCardAmerican ExpressDiscover
 
> Bicycling Catalog > Parts > Brakes/Levers/Pads

Brakes/Levers/Pads

27 Results
Hope 183 Rear/ 203 Front 74mm to IS Disc Adaptor
$23.38

· CNC machined in Barnoldswick, England · Includes mounting bolts [more]

Hope Mono M6 Disc Brake Pads
$25.00

Hope Mono M6 Disc Brake Pads • Organic: Softer compound than sintered, works better in dry conditions, but wears faster • Sintered: high-graphite compound; best for wet-weather durability [more]

Hope 6mm Copper Seal Washer (Bag of 10)
$1.90

Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder [more]

Hope Mini Brake Pads (2-Piston)
$30.00

Hope Tech Mini, M4 (pre 2003 models) Disc Brake Pads. · Sintered pad compound works best for wet conditions [more]

Hope Stainless Hose Kit with Fittings
$55.93

Hope Brake Line kits • Works for front or rear • Made for Hope by Goodridge • Fits most manufacturer's disc brakes • Braided stainless steel line • Hose length: 1600mm • Hose OD: 6mm • Hose ID: 2.4mm [more]

Hope Disc Adaptor 203 Post Caliper to Post Fork
$23.38

· CNC machined in Barnoldswick, England · Includes mounting bolts [more]

Hope 183 Front 74mm to Post Mount Black Disc Brake Adaptor
$23.38

· CNC machined in Barnoldswick, England · Includes mounting bolts [more]

Hope Copper Washer for 5mm or Stainless Line (Bag of 10)
$1.90

Replacement copper washers for 5mm or stainless Hope hydraulic brake line. [more]

Hope Brass Compression Olive
$2.39

Brass compression olive for Hope hydraulic disc brakes. [more]

Hope Brass Hydraulic Hose Insert for Braided Hose
$4.28

Brass hose insert for Hope hydraulic disc brakes. [more]

Hope Race Evo X2 Rear Brake Caliper and Lever
$267.20

Hope Disc Brake Caliper and Levers • For race, cross-country or trail use; 2-piston caliper • Uses lightweight, black, polyester-reinforced line • Titanium hardware, alloy-backed X2 pads • CNC-machined in Barnoldswick, England, from AL-2014-T6 • Rotors not included • Pre-bled system uses DOT 5.1… [more]

Hope Tech 3 V4 Front Brake
$292.25

• On the fly Bite Point Control and Reach adjustment • Direct compatibility with Shimano I-Spec shifter • Direct mount available for SRAM shifters • New piston dust cover design • New reservoir diaphragm design • CNC machine in Barnoldswick, England • 2014 T6 aluminum alloy • Wide angle hose… [more]

Hope X2 2-Piston Disc Brake Pads
$24.99

Hope X2 2-Piston Disc Brake Pads. • Organic: Softer compound than sintered, works better in dry conditions,but wears faster • Sintered: high-graphite compound; best for wet-weather durability [more]

Hope 140 Rear or 160m Front 74mm to IS Disc Brake Adaptor
$23.38

· CNC machined in Barnoldswick, England · Includes mounting bolts · Adds 20mm of disc rotor diameter to dedicated IS calipers for use on post mount forks or frames (i.e a 160mm caliper would require the use of a 180mm rotor) [more]

Hope Mono Mini Disc Brake Pads
$25.00 - $30.00

Hope Mono Mini Disc Brake Pads. · Sintered: high-graphite compound; best for wet weather durability · Organic: Softer compound than sintered, works better in dry conditions, but wears faster · Fits Tech and Tech Evo M4 Brakes [more]

Hope Race Evo E4 Front Brake Caliper and Lever
$300.60

Hope Race Evo M4 Disc Brakes & Levers • For trail, enduro, all-mountain or light freeride use; four 16mm piston caliper • Uses lightweight, black, polyester-reinforced line • CNC-machined in Barnoldswick, England, from AL-2014-T6 • Rotors not included • Pre-bled system uses DOT 5.1 brake fluid •… [more]

Hope Reservoir Cap Screw Brake Lever
$0.52

Replacement reservoir cap screw for Hope brakes. [more]

Hope Shroud for Black Brake Line
$4.48

Hope 5mm Standard Hose Kit with Fittings for Hope Brake [more]

Hope V-Twin Remote Disc Brake
$450.90

Hope V-Twin Remote Disc Brakes. The dual master cylinder fits onto a special bracket under the stem, giving the powerful brakes which dropbar bikes are usually lacking and keeps the run of cable as short as possible. The transition from cable to hydraulic is achieved with a simple piston system,… [more]

Hope Race/Race Evo Shifter Direct Mounts (Shimano XT/XTR)
$42.48

Hope Direct Shifter mounts allow shifter pods to mount directly to the Tech lever clamp, freeing up handlebar space and improving ergonomics. · Sold in pairs · Contains two shifter mounting bolts and four lever clamp bolts · Shimano mount allows the use of XTR SL-M970 2006-2010, XTR SL-M980 and… [more]

Hope Tech/Tech Evo Shifter Direct Mounts (Shimano XT, Saint, SLX)
$42.48

Hope Direct Shifter mounts allow shifter pods to mount directly to the Tech lever clamp, freeing up handlebar space and improving ergonomics. · Sold in pairs · Contains two shifter mounting bolts and four lever clamp bolts · Shimano mount allows the use of XT SL-M770 2008-2011, Saint SL-M810… [more]

Hope Tech/Tech Evo Shifter Direct Mounts (Shimano XTR,XT)
$42.48

Hope Direct Shifter mounts allow shifter pods to mount directly to the Tech lever clamp, freeing up handlebar space and improving ergonomics. · Sold in pairs · Contains two shifter mounting bolts and four lever clamp bolts · Shimano mount allows the use of XTR SL-M970 2006-2010, XTR SL-M980 and… [more]

Hope X2 M4 V2 Mono Moto Pad Disc Brake Pads Clip
$0.35

Hope Pad Clip • Fits Tech and Tech Evo M4, X2, and V2 Brakes [more]

Hope Brake Adaptor Rear IS to Post 203
$23.38

· CNC machined in Barnoldswick, England · Includes mounting bolts [more]

Hope 160mm Rear 74mm to IS Disc Brake Adaptor
$23.38

· CNC machined in Barnoldswick, England · Includes mounting bolts · Not compatible with Hope Mono6 or Moto Brakes [more]

Hope 183 Front 74mm to IS Disc Brake Adaptor
$23.38

· CNC machined in Barnoldswick, England · Includes mounting bolts · Not compatible with Hope Mono6 or Moto Brakes [more]

Hope Race Evo E4 Rear Brake Caliper and Lever
$300.60

Hope Race Evo M4 Disc Brakes & Levers • For trail, enduro, all-mountain or light freeride use; four 16mm piston caliper • Uses lightweight, black, polyester-reinforced line • CNC-machined in Barnoldswick, England, from AL-2014-T6 • Rotors not included • Pre-bled system uses DOT 5.1 brake fluid •… [more]

27 Results