Skip to main content

 

 

Write a Review

$21.00
Just the thing for rainy weather, the Portland Design Works minimalist Origami Rear Seatpost Fender attaches to a clamp-on bracket you mount to your seatpost. And it packs down so you can easily store it when not in use. - Length: 445mm (7.5") - Weight: 160g (5.6oz)
$29.99
The X-Blade 27.5+/29-inch is a high-quality 2-component clip-on fender for the rear wheel of a 27.5+/29-inch mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology. - High performance dual compound plastic - Easy quick-release-fastening by pre-adjusted powerstrap - 2 joints for optimized adjustment to all frames - Optimized dirt protection - 27.5+ and 29-inch wheel compatible
$17.99
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.
$106.00
The new standard in enduro tires - Dual-compound - Excellent all-around performance - Tubeless Ready (TR) - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Aggressor is designed for high-speed modern mountain bike trails. Advanced knob shaping creates extra gripping edges, and reinforced side knobs offer enhanced stability when cornering at speed. An all-around trail tire excelling on everything from loose cross country race courses to heavy all-mountain riding.
$199.95
Grab your bikes, put them on the back of your vehicle and go with Thule's Passage rear rack. It's that easy because Thule's innovative Fit Dial easily attaches the Passage to most vehicles and the 6 straps securely hold it in place (straps not shown), while Thule's rubber anti-sway cradles keep your bikes from swaying into each other. You'll also love that the rack arms fold making it super easy to store this rack when it's not in use.
$107.00 - $111.00
SRAM's Red road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped and pinned for precision shifting, too.
$220.00
The Sport Mechanic Bike Repair Stand prioritizes the most critical aspects of the entire Feedback Sports bike repair stand lineup – compatibility, stability, durability and portability. The 360-degree rotating clamp uses a spinner knob closure that can accommodate up to 1.9? (4.8cm) and support 65lbs (29.5kg). Plus, the Sport Mechanic leverages the same 54? (137cm) wide base, with rubber-coated end caps, for amazing stability on any surface. And when the service day is done, it folds in to a compact unit for storage or travel. Add an available Travel Bag and a Tool Tray for the optimal bike maintenance setup.
$549.95 - $699.95
A premium aluminum platform bike rack is fully lockable, easy to use, and holds bikes without frame contact. Features: - Quickly attach bikes and easily secure them to the rack using the ratcheting wheel loops - Aluminum construction makes it easy to use, install and remove - Effortlessly fold down bike arms when the rack is not in use - Convenient access to the rear of the vehicle using the HitchSwitch lever to tilt the rack down, even with bikes on it - Lock bikes to the rack using the integrated cable lock (lock included) - Fits 26"-29" wheel sizes up to a 3" wide tire - Quick to install and easy to lock the rack to the vehicle due to the tool-free, SnugTite stinger (lock included)
$155.00
If you like to ride useful bikes, racks make a lot of sense. Our 24-Pack Rack ups the useable cargo space from our 8-Pack Rack, providing more real estate for more stuff: more beer, more food, more random bits from the hardware store, more whatever. It’s manufactured from Chromoly tubing and uses the same stainless-steel hardware (handily housed in a reusable Surly Tool Bag) supplied with our other rack. It offers the same height adjustability too, so you can keep your cargo close to the ground and stable. It has plenty of braze-ons so you can customize how you secure your cargo…or just light your bike up like the space station. The 24-Pack Rack attaches to most forks that feature mid-blade and crown eyelets. It gives you a stable, rigid assembly upon which you might place your burden. No one likes a sweaty back and a sore ass, so take your stuff out of that messenger bag and put it on the front of your bike. Rack Specifications: Color: Black or silver Weight Limit: 13.6kg (30lb) Finish: ED Coating + Powdercoat Rack Material: Tubular 4130 Chromoly Platform Dimensions: 270mm x 400mm
$112.00
World Cup Champion Greg Minnaar's signature tire. - Tubeless compatible - Wide Trail casing optimized for 30-35mm rims The Maxxis Assegai tire is named after the iron-tipped spear used by the Zulu people of South Africa. Greg Minnaar, a native of South Africa, thought it was a fitting name for a tire ready to do battle on the mountain. The tall knobs punch through dust and loam to find traction, but also offer support and confidence on wet roots and rocks. While other tires excel only in certain conditions, the Maxxis Assegai is built to go fast everywhere.
$899.00
Steel Commuter and Gravel Bike Preamble is a hard-boiled steel commuter built for comfort, durability, and buffoonery on pavement and gravel. Nothing More is Needed. Nothing Less Will Do. The challenge was thus: Build a serious steel bike and give it only the attributes that matter most. Make it quick and comfortable on pavement, as well as confident and compliant on degraded surfaces. What the Enginerds put forth is Preamble, a pavement and gravel utility worker that proves you don't need to cut corners or clip coupons to make a more affordable steel bike. You just need to keep shit simple. Preamble can run racks and fenders and carry a couple water bottles. Surly was raised on stealing basic cable, after all. Smooth and efficient on asphalt, Preamble's double-butted main triangle provides a resplendent ride feel and withstands abuse from life's inevitable potholes. Make it your own with flat bars, drop bars, a basket, or bags. On the road to steel euphoria, Preamble is the gateway drug. Let facts be submitted to a candid world: - Offered in flat-bar and drop-bar configurations - Easy T-Shirt sizing to fit nearly every rider (XS, S, M, L, XL) - Sloping top tubes on XS and Small frames for improved standover and comfort - To offer the best rider experience for every frame size, XS and S frames get 650b wheelsets while M–XL get 700c - Custom-cast single-position vertical dropout
$112.00
Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!
$209.95
Protect both your bikes and your pick-up on your next adventure with heavy-duty, adjustable, padded protection. Features: - Flexible padding adjusts across a wide range of tailgates and a large handle opening provides backup camera visibility - Bikes remain securely in place with integrated bike separation and multiple-position strap anchors - Bikes and pick-up trucks are protected during transport with heavy-duty vinyl, adjustable padding - Gear can be stored securely, even while driving, due to the inside-facing mesh pockets Technical specifications: - Dimensions: 59 x 16 x 2.75 inch - Weight: 6.5-pound
$179.95
Grab your bikes, put them on the back of your vehicle and go with Thule's Passage rear rack. It's that easy because Thule's innovative Fit Dial easily attaches the Passage to most vehicles and the 6 straps securely hold it in place (straps not shown), while Thule's rubber anti-sway cradles keep your bikes from swaying into each other. You'll also love that the rack arms fold, making it super easy to store this rack when it's not in use.
$2,999.00
We designed the Confluence Apex 1 to be the best gravel e-bike for squeezing more adventure into each day. With a lightweight MAHLE hub-drive system putting out 40Nm of torque, it’s just the boost you need to head out for that lunch ride you deserve or that extra spin when your legs are feeling weary. Confluence’s aluminum frame and carbon fork are designed around a geometry that puts you in a comfortable and stable position — especially important for putting in more miles at higher average speeds. Our on-bike cargo features let you bring all you need for those extra miles, and the e-assist lets you overpack without worrying about the weight penalty. Rounding it all out is SRAM’s Apex 1 drivetrain, delivering plenty of reliable gear range for wherever you point it. Charge Your Adventure with Confluence Apex 1. Features: - 6061-T6 alloy frame Confluence’s aluminum alloy tubing is developed specifically for the Confluence frame and is heat-treated to T6 alloy standards for extra strength and durability. - Carbon fiber fork The Confluence Carbon fork is lightweight, comfortable, cargo-ready, and gives you loads of tire clearance to play with. - MAHLE X35+ Class 1 hub-drive system This Class 1 rear hub-drive motor delivers electric assist up to 20mph/32kph. It’s one of the lightest e-bike systems on the market, and its low-profile appearance means that Confluence looks like a regular gravel bike. - 40Nm max torque Up to 40Nm of assist that feels natural, not overwhelming. The MAHLE X35+ system offers three assist levels, and sensors detect when you’re pedaling to moderate the level of support generated at the hub. - 250Wh internal battery You can’t see it, but you’ll certainly feel it. MAHLE’s 250Wh battery is nestled inside Confluence’s downtube. This battery size hits the ideal combination of efficiency and weight for what we designed Confluence to do. - Capable of up to 458Wh with MAHLE Range Extender battery? (sold separately) Easily increase your range for bigger adventures with a Range Extender battery available from MAHLE. - iWOC One compact remote top tube controller Minimal and intuitive controller displays battery status and allows you to cycle through assist modes with one button. - Connected if you want to be The MAHLE system offers Ant+ connectivity for third-party devices and Bluetooth® for app integration. MAHLE’s MySmartBike app allows for customization, metrics, mapping, and more. - Massive 700c x 50mm tire clearance Confluence fits up to 700c x 50mm tires, so you can ride those lesser-traveled tracks. 700c x 42mm maximum tire clearance when equipped with fenders. - On-bike cargo features Attach front and rear racks to your Confluence for serious cargo capacity, or use the sleeker Three-Pack mounts for extra water bottles or our EXP Series Anything Cage HD to pack a cooking kit, extra layers, or whatever dream up.
$2,999.00
“Can I squeeze a ride in?” “Do I have the legs to see where this side road goes?” “A ride would feel great, but do I have the energy?” Confluence Flat Bar CUES 11 answers these questions with an “Oh yeah.” Its MAHLE hub-drive system delivers 40Nm of electric assist to give you the extra push you need to ride more. Confluence’s geometry is designed specifically for the extra comfort and confidence you want for riding gravel e-bikes at higher average speeds on sketchy roads. The aluminum frame and carbon fork balance weight, comfort, and performance. Cargo and fender mounts let you configure your Confluence your way. The Shimano CUES 11-speed drivetrain tops it all off with smooth shifting and a massive gear range. Charge Your Adventure with Confluence Flat Bar CUES 11. Features: - 6061-T6 alloy frame Confluence’s aluminum alloy tubing is developed specifically for the Confluence frame and is heat-treated to T6 alloy standards for extra strength and durability. - Carbon fiber fork The Confluence Carbon fork is lightweight, comfortable, cargo-ready, and gives you loads of tire clearance to play with. - MAHLE X35+ Class 1 hub-drive system This Class 1 rear hub-drive motor delivers electric assist up to 20mph/32kph. It’s one of the lightest ebike systems on the market, and its low-profile appearance means that Confluence looks like a regular gravel bike. - 40Nm max torque Up to 40Nm of assist that feels natural, not overwhelming. The MAHLE X35+ system offers three assist levels, and sensors detect when you’re pedaling to moderate the level of support generated at the hub. - 250Wh internal battery You can’t see it, but you’ll certainly feel it. MAHLE’s 250Wh battery is nestled inside Confluence’s downtube. This battery size hits the ideal combination of efficiency and weight for what we designed Confluence to do. - Capable of up to 458Wh with MAHLE Range Extender battery? (sold separately) Easily increase your range for bigger adventures with a Range Extender battery available from MAHLE. - iWOC One compact remote top tube controller Minimal and intuitive controller displays battery status and allows you to cycle through assist modes with one button. - Connected if you want to be The MAHLE system offers Ant+ connectivity for third-party devices and Bluetooth® for app integration. MAHLE’s MySmartBike app allows for customization, metrics, mapping, and more. - Massive 700c x 50mm tire clearance Confluence fits up to 700c x 50mm tires, so you can ride those lesser-traveled tracks. 700c x 42mm maximum tire clearance when equipped with fenders. - On-bike cargo features Attach front and rear racks to your Confluence for serious cargo capacity, or use the sleeker Three-Pack mounts for extra water bottles or our EXP Series Anything Cage HD to pack a cooking kit, extra layers, or whatever dream up.
$2,499.00
Confluence Flat Bar Altus opens up more ride opportunities with a MAHLE hub-drive electric assist good for 40Nm of torque. This e-gravel bike features comfortable, confident upright geometry and a flat handlebar for leverage and control. The aluminum frame and carbon fork strike a balance of durability and performance you’ll appreciate, with frame and fork cargo mounts to keep you fueled on those longer rides, or to load up with bikepacking gear. Shimano’s Altus 1x9 drivetrain is a proven workhorse that will get you through any ride without a fuss. Charge Your Adventure with Confluence Flat Bar Altus. Features: - 6061-T6 alloy frame Confluence’s aluminum alloy tubing is developed specifically for the Confluence frame and is heat-treated to T6 alloy standards for extra strength and durability. - Carbon fiber fork The Confluence Carbon fork is lightweight, comfortable, cargo-ready, and gives you loads of tire clearance to play with. - MAHLE X35+ Class 1 hub-drive system This Class 1 rear hub-drive motor delivers electric assist up to 20mph/32kph. It’s one of the lightest e-bike systems on the market, and its low-profile appearance means that Confluence looks like a regular gravel bike. - 40Nm max torque Up to 40Nm of assist that feels natural, not overwhelming. The MAHLE X35+ system offers three assist levels, and sensors detect when you’re pedaling to moderate the level of support generated at the hub. - 250Wh internal battery You can’t see it, but you’ll certainly feel it. MAHLE’s 250Wh battery is nestled inside Confluence’s downtube. This battery size hits the ideal combination of efficiency and weight for what we designed Confluence to do. - Capable of up to 458Wh with MAHLE Range Extender battery? (sold separately) Easily increase your range for bigger adventures with a Range Extender battery available from MAHLE. - iWOC One compact remote top tube controller Minimal and intuitive controller displays battery status and allows you to cycle through assist modes with one button. - Connected if you want to be The MAHLE system offers Ant+ connectivity for third-party devices and Bluetooth® for app integration. MAHLE’s MySmartBike app allows for customization, metrics, mapping, and more. - Massive 700c x 50mm tire clearance Confluence fits up to 700c x 50mm tires, so you can ride those lesser-traveled tracks. 700c x 42mm maximum tire clearance when equipped with fenders. - On-bike cargo features Attach front and rear racks to your Confluence for serious cargo capacity, or use the sleeker Three-Pack mounts for extra water bottles or our EXP Series Anything Cage HD to pack a cooking kit, extra layers, or whatever dream up.
$199.95
"The PCS-9.3 is a basic folding bicycle workstand designed and built for the home mechanic – a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair. Features 18"" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing. The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with a locking support yoke and upgraded internals for extra dependability. The PCS-9.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.* The PCS-9.3 quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-9.3 is the perfect way to upgrade your home shop. NOTE: The maximum weight capacity of the PCS-9.3 assumes the weight is centered below the clamp and between the legs.? - Fully adjustable clamp fits 7/8"" to 3"" (22 mm–76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts - Narrow clamping jaws (2.7""/70 mm) fit into tight areas or on short seat posts - Durable textured powder coat finish - Maximum weight capacity: 80 lbs. (36 kg) - Height adjustable from 39"" to 57"" (990 mm–1450 mm) - Base when open forms a triangle of 36"" x 36"" x 48"" (920 mm x 920 mm x 1210 mm) - Folds down to 44"" x 14.5"" (1140 mm x 370 mm) - Weight: 16 lbs. (7.2 kg) - #2848A quick-release collar with accessory pods required for use of PTH-1 Paper Towel Holder or 106 Work Tray"
$5,299.00
Warbird is Salsa's gravel race bike, built on years of experience racing in some of the nation's premier gravel events. Its carbon fiber frameset, our carefully-honed gravel race geometry, and plentiful mounts for water, tools, and accessories make Warbird a top contender in the gravel bike world. - High-modulus carbon frame with rear thru-axle dropouts and rear rack compatibility via Rack-Lock seat collar (sold separately) - Class 5 Vibration Reduction System (VRS) reduces fatigue caused by micro-impacts - Waxwing Deluxe carbon fork features a 12 x 100 mm thru-axle, Three-Pack and fender mounts, mid-blade eyelets, dynamo cable routing, and flat-mount brake standard - Compatible with 700c (45 mm maximum) and 650b (51 mm maximum) wheels and tires - Compatible with 1x, 2x, and electronic drivetrains - Internal sleeved cable routing, dropper post-compatible - Three water bottle mounts in the main triangle on 56–61 cm frames; two on 49–54.5 cm frames - Top tube mount for Salsa EXP Series Direct Mount Top Tube Bag and additional mount on underside of down tube - Accommodates a 40mm travel suspension fork and dropper post with internal routing (on 1x drivetrains only)
$6,999.00
Warbird is Salsa's gravel race bike, built on years of experience racing in some of the nation's premier gravel events. Its carbon fiber frameset, our carefully-honed gravel race geometry, and plentiful mounts for water, tools, and accessories make Warbird a top contender in the gravel bike world. - High-modulus carbon frame with rear thru-axle dropouts and rear rack compatibility via Rack-Lock seat collar (sold separately) - Class 5 Vibration Reduction System (VRS) reduces fatigue caused by micro-impacts - Waxwing Deluxe carbon fork features a 12 x 100 mm thru-axle, Three-Pack and fender mounts, mid-blade eyelets, dynamo cable routing, and flat-mount brake standard - Compatible with 700c (45 mm maximum) and 650b (51 mm maximum) wheels and tires - Compatible with 1x, 2x, and electronic drivetrains - Internal sleeved cable routing, dropper post-compatible - Three water bottle mounts in the main triangle on 56–61 cm frames; two on 49–54.5 cm frames - Top tube mount for Salsa EXP Series Direct Mount Top Tube Bag and additional mount on underside of down tube - Accommodates a 40mm travel suspension fork and dropper post with internal routing (on 1x drivetrains only)
$83.00 - $101.00
Troy Brosnan's go-fast signature tire. - Ideal for dry, fast trails - Tubeless compatible - Wide Trail casing optimized for 30-35mm rims Designed in conjunction with Aussie DH racer, Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear, depending on trail conditions.
$30.99
Keep water and mud off you with SKS's Shockboard front fender! It's super light and nearly unbreakable so you know it's ready for off-road action. Plus, it works with most rigid and suspension forks as well as disc and linear-pull brakes. The XL is ideal for 29ers thanks to 60mm of extra length.
$32.00
With SRAM's X1 Chain, it's 1x11 all the time, so the chain can be narrower, stronger, faster — all because it doesn't have to deal with high-stress, front chainring shifting. Since it only has to do rear shifts, gear changes are telepathically fast and feathery light. Its "wide tooth, narrow tooth" pattern perfectly matches SRAM's X-Sync chainrings so dropped chains and cumbersome chainguides are a distant memory. The durability is impressive, too, with SRAM's Hard Chrome tech, solid pins and a proprietary link finish for improved life span.
$30.00 - $35.00
Practical, comfortable and capable, the Daylight Waist is made for people on the move. Keep your phone, wallet, keys and other valuables organized and close at hand in this spacious waist pack. Hike, bike or take the dog for a walk with peace of mind knowing your belongings are safe, sound and secured around your body. Constructed with high-quality bluesign-approved recycled fabrics, GRS-certified recycled polyester and a PFC-free DWR coating. Versatile The Daylite Series accommodates a kaleidoscopic range of activities from day hikes on local trails to festivals, farmers markets and global travel. Sustainable Materials Constructed with main body bluesign-approved fabrics, GRS-certified recycled polyester and PFC-free DWR; a sustainable build that's durable and can take years of everyday wear and tear. Compatibility Compatible as an attachment to several Osprey travel and backpacking bags for additional storage and carry options, the Daylite and Daylite Plus are great bags to have around town or as a summit pack. - Zippered main compartment - External, front panel zip pocket - Interior mesh organizer and key clip - Adjustable 38mm webbing hipbelt
$8.95
Park's Double-Ended Cone Wrenches are designed for home mechanics. They're made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on a variety of bearing assemblies. Each wrench is chrome plated for long life and available in popular combinations from 11 to 18mm. Most applications require a pair of cone wrenches. Call or stop by. We can recommend the correct sizes for your needs.
$21.00
The Glyph Gel Cork Tape will add class to your rig, and feel good mile after mile. - Long wearing - Extra length for wider bars - Anti-slip gel backing - Patterned with symbols of the good life
$112.00
The Assegai tire is designed primarily for downhill racing and aggressive trail riding in mixed conditions. The knob height falls between the Minion DHR II and the Shorty. Like the Minion tires, the center knobs are heavily ramped on the leading edge to reduce rolling resistance. A small knob located between the center tread and side knobs provides a smooth transition while cornering. The Assegai offers predictable traction, even over slippery roots and rocks. - World Cup Champion Greg Minnaar's signature tire
$106.00 - $112.00
Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!
$45.00 - $72.00
Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!
$51.99 - $57.99
- 10-speed cassette sprocket - Offers a wide range of gearing options. - Lightweight sprocket carrier, it delivers smooth gear steps and precise shifting. - Ride anywhere with smooth and precise HG shifting
Page 1 of 5 Next page