Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

CycleOps BlueGiga USB Dongle
$29.99
The BlueGiga dongle gives Rouvy, CycleOps' virtual training software, the ability to seamlessly connect to Bluetooth devices and sensors. The BlueGiga dongle contains a Bluetooth (BLE) radio that allows PCs to communicate with BLE devices, including CycleOps smart indoor bicycle trainers and power meters made by the folks at PowerTap. Most importantly, the BlueGiga dongle is necessary to update the firmware Over the Air (OTA) via VirtualTraining for the Hammer and Magnus bike trainers. - Bluetooth dongle for PCs to work with Rouvy - Needed for Over the Air Firmware Updates to Smart Indoor Bike Trainers. - Works with PC desktops and laptops.
Garmin Garmin Charge Power Pack
$129.99
Extend your ride with the Garmin Charge power pack. This external battery pack plugs directly in to the Edge 1030 cycling computer, giving you up to 24 hours of additional battery life. It even fits into the new streamlined bike mount. You can charge on the go by connecting the Garmin Charge power pack to any compatible fitness device with an additional cable — including wearables and other cycling computers. Just connect the power pack with a USB charging cable so you can stay in the action and get the most out of your activities. - Bike mount sold separately or included with the purchase of Edge 1030 - Wearables with wrist-based heart rate that use a plug-based charger cannot be worn while charging
Zipp QuickView Road Low Computer Mount
$21.00
Low Road position places the computer in front of the bar and nearly flush with the top of the bar, making for an easy to read display whether you are on the hoods or in the drops. - Sub-20 gram computer mount - Compatible with computers with 1/4 turn twist lock interface and 31.8mm bar surface - Single Torx T25 fixing bolt
SRAM eTap Battery
$55.00
SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap
Topeak BarXtender
$19.95
Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz
Garmin Bike Speed Sensor 2 and Cadence Sensor 2 Bundle
$69.99
Monitor your speed and cadence as you ride with these easy-to-install wireless sensors. With no magnets or other exposed parts to line up, these sensors are easy to install, maintain and move between bikes. The speed sensor 2 attaches to the hub of either wheel and self-calibrates with your Edge cycling computer or compatible Garmin device to give you accurate speed and distance at all times — even without a head unit. The cadence sensor 2 fastens to any size crank arm and measures pedal strokes per minute so you can get the most out of your training. Send live speed, distance and cadence data to compatible training apps or displays by using ANT+ connectivity and BLUETOOTH Low Energy technology. With both of these sensors on your bike, you can work to improve your personal best or see where you stand against the pros.
Garmin Cadence Sensor 2
$39.99
Monitor your pedaling cadence as you ride with this easy-to-install wireless sensor. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes. Simply attach the sensor and ride. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes.
3T Computer Mount Bridge
$32.00
3T's Computer Mount Bridge allows you to set up your computer between your two aerobar extensions. - Not adjustable (works when your extensions are 80mm apart) - Extension clamp size: 22.2mm - Weight: 22 grams
3T Garmin Integra Mount
$30.00
Garmin Integra Mount fits 3T Integra Ltd and Integra Team stems and provides housing for Garmin GPS units. The mount, fabricated from injection-molded plastics, replaces Integra’s standard nose shroud with a Garmin twist-click mounting for seamless, aerodynamic fitting of Garmin devices. - It is compatible with Garmin devices up to 810 models.
Garmin Silicone Case (Edge 1030)
$19.99
Protect your Edge 1030 with this form-fitting, removable silicone case.
K-Edge Gravity Top Cap Mount
$24.99
The K-EDGE Gravity Top Cap is a great computer mount for those mountain riders that already have a lot going on with the cockpit of their bikes, or just want a simple and sleek looking computer mount. The Top Cap replaces your already existing top cap with the K-EDGE Gravity top cap. Ideal position for Downhill and Enduro racing/riding, but is also a popular solution for any bike when using a smaller style computer (20, 25, 200, 500, 510, 520, 820). - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Garmin Specific Co- Polymer Interface - Compatibility: All Garmin Edge Computers including the 1030*, 1000*, 820, 810*, 800*, 510, 520, 500, 200, 25, 20. Also supports the Touring, Touring Plus, Forerunner 310XT, and 910XT. (Larger EDGE computers such as 800, 810, 1000, 1030 may interfere with very steep, upright, stem angles.) - Made in Boise, Idaho, USA. - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded
K-Edge Garmin Sport TT Mount
$39.99
A lightweight and highly adjustable mount for positioning any Garmin computer on aero bars. The pivoting two piece design offers multiple mounting positions based on aero bars, hydration systems and rider preference. - For 22.2mm diameter aero bar extensions - Compatible with all Garmin EDGE computers - Highly adjustable for multitude of mounting positions - Replaceable Garmin Insert with K-EDGE “Definitive Click” locking system - GoPro Interface Compatible - Weight: 29g - Anodized Colors: Black, Red, Blue - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded
Zipp QuickView TT Computer Mount
$20.00
Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.
Paul Component Engineering Stem Cap Light Mount
$52.50
- A great way to mount a light, computer, power meter or GPS unit in the center of a threadless stem - Made in the USA - Material: 6061 Aluminum - Weight: 24g - Outside Diameter: 26.0mm - Stem Size: Threadless 1-1/8"
K-Edge Wahoo Splayd Race Mount
$39.99
A sleek, solid and super light platform for your computer. Providing the pro position, aero and out-front of your integrated bar/stem. - For integrated bars, including: Shimano PRO Stealth, FSA Plasma, Ritchey WCS Solostream - Adjustable fore and aft to align with Integrated bar mounting holes - Compatible with: Wahoo Elemnt, Wahoo Bolt, Wahoo Mini - Not Combo Compatible - Replaceable Wahoo ELEMNT Insert - Torque Spec – REFER TO HANDLEBAR SPEC’S or 2 N-M - Weight: 34g - Anodized Colors: Black Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Sigma instructions that recommend use of the provided tether leash.
K-Edge K-EDGE Garmin Race Mount
$54.99
Superlight, machined aluminum, race mount for the ultimate Tour de France level performance. At 32 Grams the Race Mount is 33% lighter than the “standard” Garmin Mount. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatibility: Garmin 820, 520, 510, 500, 25, 20 - Fits Handlebars: 31.8MM - NOT GoPro Compatible - Anodized Color: Black, Red, Blue, Red/Blue - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacturer defects. Damages due to abuse or crashing excluded. * Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties. Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Sigma instructions that recommend use of the provided tether leash.
K-Edge Wahoo Fixed Stem Mount
$24.99
An excellent choice for mountain, cross, and road cyclists who prefer to have the computer above the stem. The mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. - Supported Computers – Wahoo ELEMNT, Wahoo Bolt, Wahoo MINI - Compatible – 1-1/8? Steerer tube Diameter, - Thickness: 5mm, Length 50mm (Center-to-Center) - Recommended for 0 Degree to Negative Degree Stem Angles - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Weight: 25g - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded
Minoura CS-500 Accessory Mount
$19.99
- Superlight computer/light mount fits cleanly underneath the stem - Replace a headset spacer(s) below or above the stem on any 1-1/8" steerer - 12mm stack height with 50mm wide mounting area, 120mm long angle adjustable arm
K-Edge Garmin Combo Mount
$64.99 - $69.99
Out-front computer mount for Garmin Edge, Forerunner, and Touring cycling computers. This is K-Edge's next generation of industry-leading Garmin Computer Mounts—stronger, easier, more versatile, and more stylish design to complement your Garmin and your bike. The ultimate upgrade for your Garmin computer. Their advanced co-polymer Garmin insert locks your computer in place with strength and security. Designed and tested extensively so that the replaceable insert breaks away instead of your computer tabs in the event of a crash or mishap. - CNC Machined 6061 T6 Aluminum - Compatibility – 31.8mm and 35mm diameter handlebars. - New clamp design is hinged for ease of installation. - Supported Computers – Most Garmin Edge, Forerunner, and Touring models, including the new Garmin Edge 520, Edge 20 and Edge 25 models (Edge 1000 fits on the longer XL mount) - Combo Compatible – versions available that support GoPro style interface action cameras and lights - Weight – (31.8 mm) 55.4 grams - Weight – (35.0 mm) 60.4 grams Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. *K-EDGE Combo Mount are NOT DESIGNED to hold a Cycliq Fly 12. (Cycliq Fly 12 & Fly12CE users should choose the K-EDGE K13-410, K13-420, K13-2450 GO BIG camera/light mounts.) Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Garmin EDGE instructions that recommend use of the provided tether leash.
K-Edge GO BIG Pro Saddle Rail Mount (1/4x20)
$64.99
The K-Edge Universal Camera 1/4-inch-20 Pro Saddle Rail Mount provides a rock-solid platform for any camera to capture the unique angle of a trailing rider. Use the 1/4-inch-20 (tripod) mount for almost every camera, including: Garmin, SONY, Contour, Drift, Rollei. Or remove this adapter and use the base GoPro mount for all Hero cameras. - CNC machined aluminum mount with solid locking system - Universal Camera Mounting system fits almost every seat rail - Designed and produced to confidently lock your camera in place - Solid design and precision fit to securely lock camera and improve footage - Compatibility: Go Big Saddle Rail Mount, mated to 1/4-inch-20 threaded (tripod) interface adapter gives you one mount that will work for any camera. - Material: CNC machined 6061-T6 Aluminum, Stainless Steel 1/4-inch-20 Thumbscrew - Fitment: Camera can be mounted above or below the mount - Weight: 58 grams - Made in Boise, Idaho, USA
Quarq ShockWiz Spares - Hose Kit
$50.00
Spare hose kit for Quarq's ShockWiz automated suspension tuning device. - Contains one of each hose type and four zip ties.
K-Edge Garmin Mount
$49.99 - $54.99
This is K-Edge's next generation of industry-leading Garmin Computer Mounts—stronger, easier, more versatile, and more stylish design to complement your Garmin and your bike. The ultimate upgrade for your Garmin computer. Their advanced co-polymer Garmin insert locks your computer in place with strength and security. Designed and tested extensively so that the replaceable insert breaks away instead of your computer tabs in the event of a crash or mishap. - CNC Machined 6061 T6 Aluminum - Compatibility – 31.8mm and 35mm diameter handlebars. - New clamp design is hinged for ease of installation. - Supported Computers – Most Garmin Edge, Forerunner, and Touring models, including the new Garmin Edge 520, Edge 20 and Edge 25 models (Edge 1000 - fits on the longer XL mount) - Combo Compatible – versions available that support GoPro style interface action cameras and lights - Weight – (31.8 mm) Standard Mount 45.4 grams; Combo Mount 55.4 grams Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. *TheNEW K-EDGE Handlebar Computer and Camera Mounts (1420, 1440, 1500, 1505, 1605, and 1905 series) are built in three parts. An integral part of our mounts are the connection where the arm and clamp are joined by two assembly bolts located on the underside of the mounts. THESE ASSEMBLY BOLTS ARE NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties. Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Garmin EDGE instructions that recommend use of the provided tether leash.
SRAM RED eTap Bar End Clic Shift Buttons
$121.00
- Shift buttons mounted to the end of a bar plug - Included wire connects to Blip Box - Fits bars with 19 - 20.5mm inside diameter
K-Edge Wahoo ELEMNT Combo Mount
$64.99 - $69.99
Out-front computer mount for Wahoo Element computers. This is the next generation of industry-leading Wahoo Computer Mounts – stronger, easier, more versatile, and more stylish design to compliment your Wahoo and your bike. The ultimate upgrade for your Wahoo computer. The advanced co-polymer Wahoo insert locks your computer in place with strength and security. Designed and tested extensively so that our replaceable insert breaks away instead of your computer tabs in the event of a crash or mishap. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Garmin Specific Co- Polymer - Compatibility – 31.8mm and 35mm diameter handlebars. - New clamp design is hinged for ease of installation. - Combo Compatible – versions available that support GoPro style interface action cameras and lights. All cameras utilizing a GoPro interface, GoPro HERO series, GoPro Sessions’ series Cameras. - Made in Boise, Idaho, USA. - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded. *Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. K-EDGE Combo Mount are NOT DESIGNED to hold a Cycliq Fly 12. (Cycliq Fly 12 users should choose the K-EDGE K13-410, K13-420, K13-2450 GO BIG camera/light mounts.) K-EDGE mounts co-polymer plastic computer inserts are designed to hold the corresponding computer ONLY (Garmin- black, WAHOO- blue, SIGMA – red), and breakaway in a crash to protect the computer body. K-EDGE Combo Mounts are designed to hold Garmin, WAHOO and SIGMA cycling computers and Go Pro, Shimano, Garmin VIRB X sized cameras and standard sized cycling lights (Light and Motion Urban or Niterider). Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Garmin EDGE instructions that recommend use of the provided tether leash.
Garmin Silicone Case (Edge 820)
$14.99
Protect your Garmin Edge 820 (sold separately) with a form-fitting, silicone case and keep your mind at ease. Choose from a variety of cool colors to match your personal style.
Shimano BMDN100 Di2 Long Battery Mount for External Wiring
$121.99
Shimano Di2 External Battery Mounts - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware
Garmin Index Smart Scale
$149.99
Whether you’re an athlete in training or just trying to maintain a healthy weight, Garmin Index smart scale provides the metrics you need to track progress and see results. It measures weight (lbs, kg, st), body mass index (BMI), body fat/water percentage, bone mass and muscle mass. - Wi-Fi connected; compatible with Bluetooth and ANT wireless connectivity - Measures weight, body mass index, body fat, muscle mass and more - Recognizes up to 16 users - Up to 9 months of battery life
Sigma Sport Butler - Out Front Mount
$19.99
Enjoy easy viewing with the Butler Out Front handlebar mount! Out Front Mount for following models: BC 1909 STS BC 2209 STS ROX 5.0 ROX 6.0 ROX 8 ROX 8.1 ROX 9 ROX 9.1 *Note: not for use with ROX 10.0
K-Edge Fixed Garmin Stem Mount
$24.99
The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. The fixed version is recommended for zero degree or negative degree stem angles. Can also be used with positive degree stems if additional spacers added (5mm to 10mm) above the stem. Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer. - Compatibly – 1-1/8" Steerer tube Diameter, Thickness (@ Steerer) – 5mm, Length (Center-to-Center) – 50mm, - Recommended for 0 Degree to Negative Degree Stem Angles - Supported Computers – Garmin Edge 20, 25, 200, 500, 510, 520, 800, 810, and Forerunner 310XT - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
Wahoo RPM Speed/Cadence Sensor Combo Pack (BT/ANT+)
$69.99
All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers. - Dimensions (LxWxH): 1.25" x.75" x 1" - Weight: 7 grams (without mount) - Battery: CR2032 - Battery Life: Up to 12 months - Water Rating: IPX7 (waterproof up to 5 ft) - Wireless Signal Strength: Up to 10 feet - Note: Speed Sensor is NOT compatible with spin bikes
Page 1 of 5 Next page