Parts & Accessories
Give your pack a lower center of gravity with the brand new Crux LR reservoir. It delivers 20% more water per sip while keeping weight positioned low on your back, which translates to better stability in the saddle and on the trail. The Crux delivers 20% more water with every sip, plus an on/off lever that seals your tube shut when you’re not drinking. CamelBak also upgraded the fill-port design to include an ergonomic handle and a redesigned a cap that’s more intuitive and easier to fill—small changes that make it that much easier to fill up and hit the road.
Aqua Cell replacement parts kit for use with the Profile Design Aqua Cell hydration system. - Kit includes straw, extra mesh, bottle tops, and rubber bands
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.
Keep your reservoir funk-free with this cleaning brush kit from CamelBak.
This water bottle enclosure is designed to insulate and prevent water from freezing when riding in cold conditions. - Waterproof, 5.5mm neoprene construction with nylon lamination inside and outside - Includes: plastic cage, Allen key, screws and washers - Fits and encloses up to an average 20oz bottle and has enough room for a heat pack - Extended zipper pull for easy open close while riding with winter gloves - Reflective material on logo
Colored talons for the Raptor Cage. Now you can finally match your cage to your bike at a low cost!
CamelBak's Big Bite Valve Cover keeps your bite valve clean. Put it on your valve for storage or while traveling and your bite valve will stay just the way you left it.
Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter
Show your love for bicycles, tools and all things Park Tool with their Coffee Mug. Perfect for impressing your guests with a cool-logo cup, or fueling yourself before a fun wrenching session, a few of these mugs should be in every kitchen cabinet and bicycle workshop, too!
Integrated stainless steel storage bracket that fits under a bottle cage. Holds included Twin Speed Drive CO2 head, V5 multi tool, two CO2 cartridges and two Matrix levers. Not available with CO2 cartridges in all countries. Weight: 95g /311g Loaded
On a lot of frames, the bottle cage mounts just aren’t in the right place. If your bottle cage isn’t playing nice with your other accessories, Problem Solver's height-adjustable adapter might do the trick. With 45mm of fore-to-aft adjustability, you should be able to find the optimal position for your cage. -45mm of adjustability -28 oz water bottles max -Constructed of AL-6061
Fits between cage and frame and allows water bottle cage to twist sideways for easier bottle removal and replacement. Works with most Topeak water bottle cages. - Material: Engineering grade plastic - Size: 7.9 x 2.5 x 1.5 cm / 3.1” x 1” x 0.6” - Weight: 25 grams
Aluminum BTA hydration mount compatible with Torpedo Versa (sold separately). Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 6061-T6 Aluminum - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)
XLAB's Aero Cage Optimizer is a cool little device that mounts onto the bottle mounts on your frame or aero-bar or rear hydration system. Once in place, it lets you adjust your cage up, down, forward or backwards up to 1.75 inches so that everything fits and works the way you want it (cages sold separately).
New Torpedo Bottle and essentials to reload your Torpedo System, or upgrade to the new Anti-Leak Design. Includes: Super-Sealed TORPEDO Bottle, Straw, Drink Valve, Solid and Split Lids, Leak-Free Breather Valve, Dolphin Tail Straw Retainer and Hardware.
Carry your gear tucked out of the wind with XLAB's Super Wing SMP Rear Carrier designed specifically for Selle SMP and Phenom saddles. This versatile aero add-on delivers options galore. You can easily attach what you need for any length ride. A small seat bag fits inside the carrier, bottle cages attach on the outside and tubes can go underneath (accessories sold separately). The possibilities are endless. You also have 12 different mounting options so you can place your bottles just where you want them. Also, the Super Wing is made of light, tough aluminum so there's no twisting under load, no swaying while riding and no bouncing or losing bottles over bumps.
The Crux delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks. - Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 30 x 18 x 6 cm/ 12 x 7 x 2.5 in
Park Tool's Mini Bottle Opener is made of durable, rustproof stainless steel and has Park's great-to-grip and attractive blue vinyl-coated handle. This handy tool fits on a keychain and has a bottle opener and 10mm open-end wrench built in.
New Crux tube offers 20% more water per sip, and with the insulated thermal sleeve your water stays cooler in warm weather.
Storage strap kit for Profile Design's Rear Mount Carbon Water Bottle Cage - Compatible with standard 7mm saddle rails
XLAB's Turbo Wing Rear Carrier delivers options galore so you can easily attach bottles, a bag, CO2 cartridges, and everything else you need for any length ride, and keep it all neatly tucked behind you, out of the wind. There are also 15 different mounting options and you can keep it upright for low drag or invert it for easy access. Plus, it's made of light, strong aluminum, which means there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.
Carry your gear behind you tucked out of the wind with XLAB's Super Wing Dual Rear Carrier. This versatile aero add-on delivers options galore. You can easily attach what you need for any length ride. A small seat bag fits inside the carrier, bottle cages attach on the outside and tubes can go underneath (accessories sold separately). The possibilities are endless. You also have 12 different mounting options so you can place your bottles where you want them. Also, the Super Wing is made of light, tough aluminum so there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.
The Crux delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks. - Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 38 x 19 x 6 cm / 15 x 7.5 x 2.5 in
Osprey’s Hydraulics 3L Reservoir by Hydrapak is ideal for large-volume packs and long-duration activities. The HydroStatic backerplate provides structure for easy loading into a full pack and maintains a flat profile. Thoughtful design makes filling, cleaning and most importantly staying hydrated on the trail easier than ever. All parts are BPA-free, phthalate-free, lead-free, guaranteed. All materials are certified food safe according to FDA and EU regulations.
The CamelBak Crux replacement tube has larger diameter and offers more water per sip than previous tubes. Pair with the Crux reservoir on/off valve (sold separately) for 20% more water flow per sip.
Keep your water flowing freely, even in the most harsh conditions. The Crux Thermal Control kit takes insulation to the next level so your tube and valve stay ice-free. Designed for reservoirs with the Quick Link system, this cold-weather accessory will extend the range of use your hydration pack during all outdoor adventures. Features: - Insulated Tube: Protects the flow of your fluids in cold conditions - Freeze-Proof Valve: Integrated cover keeps ice from forming in bite valve - Fits Reservoirs with Quick Link System: Keep your Crux working hard year-round with this easy upgrade
• KEEP LIQUIDS COOL - Silver exterior reflects heat away keeping liquids 25% cooler • FULL INSULATION - Bottle (sold separately) is completely covered for maximum insulation • INSULATED STRAW COVER - Keep liquids in straw cool for instant refreshment • EASY INSTALLATION - Simple install and removal for bottle cleaning • FOLDING STRAW ABILITY - Fold straw for optimum aerodynamics • PREMIUM MATERIAL - Full 3mm low-friction smooth skin insulating neoprene • Compatibility: Fits TORPEDO SYSTEM 50, 100 & 400 • Material: Neoprene • Weight: Bottle cover: 41 grams, Straw cover: 10 grams • Includes: Bottle cover, Straw cover, Instructions
With the Quick Link Conversion Kit, you can retrofit any CamelBak reservoir with your favorite Quick Link accessories.
Replacement CamelBak Podium 2.0 Smoke Cap.
Keep your reservoir free from taste and odor and ready for your next adventure. Fast-acting tablets are easy to use and work in just 5 minutes. - Periodic cleaning with CamelBak Cleaning Tabs keeps reservoir and tube free from taste and odor - CamelBak Cleaning Tabs work in just 5 minutes for a thorough cleaning - 8 Cleaning Tablets Per Pack.
Page 1 of 2 Next page