Skip to main content

 

 

Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

$15.00
The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level. - 32mm diameter clamping area for lights - Attaches with two M5 bolts and a steel backing plate - Mounts on left or right side
$7.99
-Mounts easily to front racks with threaded M5 mounts -Allows for unobstructed light positioning -22.2mm clamping diameter
$20.37
This low profile curved adhesive helmet mount allows you to use your Exposure helmet light on any helmet. Utilising a buckle and clip system enables quick attachment and removal. Works with Sirius DB, Zenith, Diablo SYNC, Diablo, Axis, Joystick
$11.88
Bracket for aero seatpost
$3.00
Updated and more secure clothing clip for mounting CatEye safety lights.
$9.99
This mount is designed to securely attach your Light and Motion Vis 180 Micro taillight to your bicycle.
$14.99
Planet Bike's BRT Strap is a small item that provides big visibility. This versatile LED safety band can be used as an arm band, pants keeper, dog collar and anything else you can think of. An included lithium battery provides over 200 hours of run time in either flashing or steady mode.
$13.99
Origin-8's Eyelet Stub Light Mount is an ingenious way to easily mount a light (or other accessory) to any bicycle frame with standard rack/fender eyelets. The Stub is made of light and tough 6061 aluminum tubing with an outside diameter of 26mm and an overall length of 46mm. It simply bolts to the eyelet with its included 5mm screw. There's a press-fit cap on the end to seal it.
$157.00
LED stat light Instant start up power, no delay iphone and samsung compatable 1 Amp output @ 5v USB Fully internally potted Fully waterproof /dunk proof Built in supercap charger 300uf input smoothing 2000uf output smoothing Low Vf full wave rectifier Full power up to 100km/hr....no cut out at speed.
$19.99
Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series
Pre-made switch harness for your dynamo setup. PLUG AND PLAY! Connects your lights and/or usb charger to your dynamo hub. Allows you to easily switch between them. No unplugging cables. No wiring or assembly needed. Simple and easy. Hub Connector Options: There are two variants of connector designs. 1. Shutter Precision/Shimano plug 2. Schmidt SON spade
$15.00
Replacement Part – Headlight Bracket - Fits all Serfas headlights - Long silicone strap allows endless mounting options - No tools needed - Cannot be used with: TST-70, TST-100, TST-150 & TBT-50R
$5.00
- Mounts Beamer and Blaze 1/2W lights to a helmet - Compatible with Beamer 1, Beamer 3, Beamer 5, Blaze 1/2W and Blaze 2W Micro, Blaze 140 SL, Blaze 180 USB - Increased weight and length of Blaze 300, 500, and 650 USB lights may cause awkward mounting on helmet
$6.99
- Compatible with seatpost diameter 20mm-36mm - Adjustable light angle - Easy on/easy off design makes for quick mounting and removal - Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis, Superflash Micros and Blinky Safety rear light
$9.99
The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL
$6.99
- Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis Superflash Micros and Blinky Safety rear light - Designed specifically for aero seat posts - Adjustable light angle - Easy on/easy off design makes for quick mounting and removal
$9.99
Mount the Nip light to an e-Bike that has the specialty Pro Max stem for accessories.
$3.00
Optional mounting bracket for the CatEye Rapid X, CatEye Rapid X2, and CatEye Rapid X3. Allows you to mount your Rapid to any of the CatEye tail light brackets.
$8.99
Lezyne's Composite Bar Mount is a hard mount made of a reinforced Composite Matrix cradle for a strong and secure attachment of the Mega Drive, Deca Drive, and XL LED lights to the handlebar. It is designed for 25.4 mm or 31.8 mm bars, with the cradle designed to pivot 15 degrees laterally to allow adjustment of the LED light beam angle and directing it where it is most needed. A large thumb screw secures the CM mount to the bar without need of tools, and can be tightened by hand or a 1mm hex key. Molded rubber shims add grip and fine-tune fitting to undersized bars. Composite Bar Mounts are sold in a kit with the Mega Drive, Deca Drive, or XL LED lights.
$7.99
The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.
$18.99
Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter
$6.00
Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts
$9.90
Adapter fits the range of helmet lights to action camera brackets such as Go-Pro, AEE, Sony and many others. Works with Zenith, Diablo SYNC, Diablo, Axis, Joystick, Link Plus DB, Link DB
$9.99
All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm. SYSTEM COMPATIBILITY - Lumina Series - MiNewt Cordless Series - Mako Series WARRANTY - This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)
$5.95
- Mounts most AA flashlights to handlebars and helmets - Ideal low-cost lighting alternative for cyclists
$10.99
The versatile Composite Matrix Helmet Mount is a durable and versatile accessory for Lezyne KTV Pro, Power XL, Macro XL, Hecto XL and Micro XL Drives. It is constructed with lightweight and durable mold-injected Composite Matrix material for its base plate and spherical pivot. A strong rubber and Velcro strap attaches the mount to the helmet. The Composite Matrix spherical pivot and cradle allow the user to adjust the position of the light in all directions.
$4.99
- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack
$9.99
The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series
$9.99
The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb
$9.99
This mount securely attaches your Light and Motion Vis 180 Micro taillight to a standard rear bicycle rack (taillights and racks sold separately).
Page 1 of 3 Next page