Bells/Noise Makers

The Mirrycle Jellibell is a fun way to let pedestrians and other riders know you're coming! The Jellibell has a see-through top so you can see the gears spin as it rings. It's weatherproof, too! - Dome Diameter: 48mm (1.9") - Fits handlebars with 21mm – 22.5mm (.83" – .89") outside diameters

Dimension Mini Bells take up less room on handlebars and fit 40mm or narrower. Check out the video for a YouTube sound clip!

- 115 decibel horn with volume control switch - Mounts to most handlebars - Air reservoir is easily refilled with any bike pump - no batteries needed - Extension allows for more versatility when mounting

Timber 3.0 is a solid brass bell with a sleek black finish and a crisp, clean sound. If you find yourself using your bell on nearly every ride, then the Bolt-On model is the one for you. The Timber 3.0 Bolt-On is identical to the original model, except it features a tight, durable mount that won't spin, shake or rattle on your bars. Similar to a GPS or Garmin mount, the flexible nylon band tightens to your bars with a 5mm hex bolt. The band itself is 31.8mm diameter, the same as the wider part of your bars near the stem. It also includes a flexible 22.2mm shim for mounting your bell securely near your grips, closer to your hands (you'll want to use this setup for oversize and DH bars). - Installation is easy. There is no need to remove the grips, brakes, etc. Just flex the clamp open and slide onto your bar. - Upgraded version has a slimmer profile on your handlebars, smoother shifting between ring modes, and we've beefed up the strength of the internal clapper cable and the lever handle for longer life.

Mirrycle's Incredibell Brass Duet makes a traditional ding-dong dual-tone ring with the beautiful resonance of solid brass. Plus, its compact size lets you mount it just about anywhere on your handlebars. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters

Mirrycle's Incredibell Adjustabell 2 uses a fully adjustable handlebar clamp that fits any size bars. Its perfect size and pivoting ringer let you mount it just about anywhere on your handlebars, and allows you to ring it with your thumb or finger. The Adjustabell 2 can even be mounted to a ski pole or walking stick. One flick and it rings loud and clear for all to hear. - Weight: 26g (.9oz) - Dome Diameter: 34mm (1.34") - Fits handlebars with 15mm – 39mm (.59"- 1.54") outside diameters

Our Trail Bell announces your presence while letting you keep both hands firmly on your grips and goes silent with just the flick of a switch. Fits all handlebars from 22.2 to 31.8mm.

Lezyne's Classic Brass Bell features a compact, classic shape constructed from modern, high-quality materials. The bell itself is made from high-polished brass, mounted to a machined aluminum base. The small brass striker provides a sharp, impressively loud ring when flicked, warning others of your presence. A simple O-ring attaches the bell to a variety of tube sizes and shapes while integrating cleanly with any bicycle. Weights - Small: 21g - Medium: 28g

Dimension Mini Bells take up less room on handlebars and fit 40mm or narrower. Check out the video for a YouTube sound clip!

Clear, luxurious bellissimo double ring A good, clear bike bell can make the difference between a safe ride and a dangerous one. Features - Clear, luxurious bellissimo double ring - Luxe aesthetic and design - Twist top action - Quick Assembly: Easy screwdriver installation on 22.2 mm bar - Construction: Molded thermoplastic with shell inner bell - Weight: 0.08 lb / 38g

Keep valuable handlebar space free with Mirrycle's Incredibell Striker Bell. It integrates into the top cap of the headset, can be mounted any way you choose, and features an adjustable dinger as well. A flick of your finger and the Striker Bell rings loud and clear for all to hear. - Dome Diameter: 45mm (1") - Weight: Black and silver: 36g (1.3oz); Brass: 68g (2.4oz)

Little, Light, & Loud! Our Original Incredibell has been redesigned for quick and easy mounting on nearly any handlebar. The pivoting dinger can be rotated to any position.

The Woodpecker Bell features a faux wood grain finish with a charming woodpecker hammer. Looks like a bird pecking at a tree, sounds like a bell. Check out the video for a YouTube sound clip!

Medium sized bells with exciting and classic designs to fit a range from 46mm to 60mm wide. Check out the video for a YouTube sound clip!

The louder version of the Original Incredibell. The Incredibell XL is a little bigger and comes with the same pivoting dinger. - Dome Diameter: 43mm (1.7') - Fits handlebars with 21.7mm – 26mm (.85' – 1.03') outside diameters

Clear and Classic Ring Cut through traffic noise and make yourself known on the road while protecting yourself from the risk of auto and pedestrian accidents. Features - Classic ring - Low profile with clean minimalist design - Thumb spring trigger - Quick Assembly: Easy screwdriver assembly installation on 22.2 mm bar - Alloy dome with molded thermoplastic mounting - Weight: 0.04 lb / 18g

Accessorize your bike in a way that announces your presence in style. The omni-directional rotating top produces a clean, clear, loud ring. - Fits handlebars with 22.2mm - 31.8mm (.87-inch - 1.25-inch) outside diameters - Dome Diameter: 44mm (1.6")

Dimension Mini Bells take up less room on handlebars and fit 40mm or narrower. Check out the video for a YouTube sound clip!

Available with either polished brass or chrome plated dome. Striker can be adjusted for individual comfort. - Dome Diameter: 45mm (1.7") - Fits handlebars with 22mm – 25.4mm (.86" – 1") outside diameters

Let everyone know your coming with Sunlite's I Love My Bike Bell. It makes the classic "ring-ring" sound that everyone loves. It fits most bars and can be used right or left handed.

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Large Oi fits 23.8 to 31.8mm bars e.g. drop bar road bikes and some cruiser / commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognizable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organizer inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Small Oi fits 22.2mm diameter bars, e.g Mountain bike (near the grips), BMX & some old commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognisable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organiser inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

Don't let the small size fool you. The Original Incredibell is little, light and LOUD! Its diminutive dimensions and pivoting ringer let you mount it just about anywhere on your handlebars. A flick of your finger and the Ding! Ding! rings clear for all to hear. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 26mm (.86" – 1.02") outside diameters

Add some flair and fun to kids' bikes with MSW Squeeze Horns. - Fits standard 22-26mm diameter handlebars - Approximately 3" wide

Announce your presence with Portland Design Works' Alexander Graham Bell. Built to replace a 10mm 1 1/8 headset spacer, this bell is a classy addition to your rig without sacrificing any of your precious handlebar real estate. - ?Polished brass bell  - Replaces a 10mm 1 1/8" headset spacer - Quick-reflex alloy clapper - Lifetime PDWarranty

Give notice well in advance with a loud, convincing tone—the Spurcycle rings powerfully and for longer to help you be heard even while riding fast. Highly adaptable mounting fits any handlebar—standard and oversize, aluminum or carbon 2.5mm hex tool required for installation (not included)

Sleek Design Save precious bar space. Features - Classic bell sound - Sleek and unobtrusive design saves precious bar space - Lever action perpendicular to bar - Quick Assembly: Tool-free - strap easily mounts to any size bar 22.2 to 25.4 mm - Alloy dome with molded thermoplastic mounting - Weight: 0.06 lb / 30g

Low profile and brilliant bass dome. Cut through traffic noise and make yourself known on the road while protecting yourself from the risk of auto and pedestrian accidents. Features - Classic brass sound - Low-profile design with brilliant brass dome - Adjustable rotating thumb spring trigger for ambidextrous use - Quick Assembly: Tool-free - easily mounts to any bar from 22.2 - 36.2 mm - Brass dome with adjustable rubber strap - Weight: 0.08 lb / 34g

Classically designed bicycle bell featuring modern materials and a robust machined-aluminum handlebar mount. The bell dome and striker are crafted from high-quality brass with a sturdy stainless steel spring. Its secure base quickly mounts to most modern bicycle handlebars (25.4mm or 22.2mm diameter) with a stainless steel Torx bolt. And its narrow design attaches neatly between other handlebar accessories. It provides a powerful ring that’s excellent for all cyclists and commuters alike. This bell is engineered to be extremely durable with excellent resistance to weather-related wear-and-tear. This lightweight and stylish ringer is the ultimate bicycle bell. - Compact, classic bell-shape construction for a high-quality sound - Bell and striker are made from high-polished brass - CNC-machined aluminum hard handlebar mount, designed for 25.4 - 22.2mm tube - Molded rubber shims add grip and fine tune fitting - Stainless steel hammer - Impressively loud ring - Weight: 34g

Let other cyclists and pedestrians know you're there by ringing your Planet Bike Courtesy Bell. This minimal bell has a striker that rotates 360 degrees so you can place it wherever you need it for easy access. And it fits on handlebars with diameters from 22.3 to 26mm.