Filter By:
Suspension
$1,079.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability.
- Genuine Kashima Coating on upper tubes
- FIT damper and FLOAT EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment
- Updated Crown Design saves up to 20 grams, and offers significant structural improvements
$1,139.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability.
- Genuine Kashima Coating on upper tubes
- FIT damper and FLOAT EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment
$1,249.00
E-Bike specific long-travel Enduro fork with 38mm stanchion tubes featuring, floating axle, new arch design, and lower leg bleeders to release built-up pressure.
- Genuine Kashima Coating on upper tubes
- GRIP2 damper with Variable Valve Control
- Next generation FLOAT EVOL with larger negative air chamber increases small bump sensitivity
- Floating axle design
- Lower leg bleeders
- Direct mud guard mount
$1,089.00
The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths.
- Step-Cast chassis
- Genuine Kashima Coating on upper tubes
- FIT4 damper and FLOAT EVOL air spring
- Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities
- Kabolt Thru Axle
$989.00
The 38 Performance Series forks retain the same black anodized 7000 series aluminum upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately.
- Black anodized upper tubes
- FIT GRIP damper and FLOAT EVOL air spring
- Three on-the-fly compression damping positions: Open, Medium, Firm
- Performance Series black-on-black graphics package
$1,149.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability.
- Genuine Kashima Coating on upper tubes
- FIT damper and FLOAT EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment
- Updated Crown Design saves up to 20 grams, and offers significant structural improvements
$1,149.00
FOX 38 Performance Elite Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Performance Elite forks retain the same adjustments, features, dampers, weight, and 7000 series aluminum upper tubes as Factory Series, but have black anodized stanchions.
- GRIP2 damper includes Fox's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance
- Next generation FLOAT EVOL with larger negative air chamber increases small bump sensitivity
- Floating axle design provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality
- Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button
- Equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release
- Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping
$1,149.00
Packed with features to dominate the descents, the 36 answers the call from aggressive all-mountain riders. Now available with the gravity-focused GRIP X2 damper.
GRIP X2
Ultimate descending performance with greater traction and even more control at speed. The most tunable, supportive and smoothest descent-focused damper created by FOX.
KABOLT X AXLE
A lightweight bolt-on floating axle that shaves grams while increasing torsional stiffness and reducing friction between upper and lower fork legs for smoother suspension travel.
LOWER LEG BLEEDERS AND BYPASS CHANNELS
Push-button pressure equalization (bleeders) and increased volume to alleviate pressure ramping (bypass channels) allow improved small bump sensitivity and responsiveness.
CHASSIS Standard
DAMPER CONTROLS HSC - LSC - HSR - LSR
AXLE Kabolt-X 110
RAKE 44mm
STEERER 1.5 Tapered
UPPER TUBE FINISH Kashima
AIR CHANNELS Yes
BLEEDERS Yes
FLOATING AXLE Yes
ROTOR SIZE. 180 direct Post Mount, Up to 230 compatible
MUD GUARD MOUNT Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment
AIR SPRING FLOAT EVOL
STARTING WEIGHT 1929g (36, 29, F-S, 160, Grip X, Kabolt X)
$1,139.00
36 E-Optimized Factory forks are made specifically for the rigors of E-Bikes with a stouter chassis and longer durability due to adding material to strengthen critical areas. The design also uses tuning originally done for Enduro use, which fits the needs of the E-MTB and overall E-Bike uses.
- Genuine Kashima Coating on upper tubes
- FIT GRIP2 Damper and FLOAT air spring
- E-Bike Chassis
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment
$769.00
Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Performance rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor.
- Black anodized upper tubes
- 32 mm upper tubes and ample bushing overlap for a quality ride
- Hollowed out lower legs provide even more weight savings
- FIT GRIP damper and FLOAT air spring
- Performance Series black-on-black graphics package
$1,249.00
When you need to go really big, reach for the 38. Optimized for 160-180mm of travel, the 38 redefines capability of a long travel single crown fork, setting a new benchmark for confidence, performance, and durability.?Welcome to the big time.
GRIP X2
Ultimate descending performance with greater traction and even more control at speed. The most tunable, supportive and smoothest descent-focused damper created by FOX.
KABOLT X AXLE
A lightweight bolt-on floating axle that shaves grams while increasing torsional stiffness and reducing friction between upper and lower fork legs for smoother suspension travel.
LOWER LEG BLEEDERS AND BYPASS CHANNELS
Push-button pressure equalization (bleeders) and increased volume to alleviate pressure ramping (bypass channels) allow improved small bump sensitivity and responsiveness.
DAMPER GRIP X2
DAMPER CONTROLS HSC - LSC - HSR - LSR
AXLE Kabolt-X 110
RAKE 44mm
STEERER 1.5 Tapered
UPPER TUBE FINISH Kashima
AIR CHANNELS Yes
BLEEDERS Yes
FLOATING AXLE Yes
ROTOR SIZE 180 direct Post Mount, Up to 230 compatible
MUD GUARD MOUNT Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment
AIR SPRING FLOAT EVOL
STARTING WEIGHT 2194g (38, 29, F-S, 180, Grip X, Kabolt X)
$30.00
These genuine fox dust seals and wipers will keep your suspension fork running smooth for years to come.
$769.00
Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Performance rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor.
- Black anodized upper tubes
- 32 mm upper tubes and ample bushing overlap for a quality ride
- Hollowed out lower legs provide even more weight savings
- FIT GRIP damper and FLOAT air spring
- Performance Series black-on-black graphics package
$1,069.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability.
- Genuine Kashima Coating on upper tubes
- FIT damper and FLOAT EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment
Page 1 of 1