Parts & Accessories

- Steel - Quality leather straps included

Pedal Axle Rebuild Kit for SPIKE & OOZY Trail Pedals - 1 set L&R axle - 2pcs IGUS bushing - 2pcs O-ring - 2pcs dust cap - 2pcs stainless shim washer - 2pcs silicone friction seal - 2pcs lock nut

RaceFace Chester Pedal Rebuild Kit

PIN KIT FOR OUR COMPOSITE PEDALS KIT CONTAINS: - 40 THREADED M3x10mm SOCKET HEAD PINS - 40 NYLOCK NUTS

- Chrome plated steel strapless toe clip - Hardware included

- Protects cranks from damage caused by overtightening pedals - Can be used for bike fit adjustments, dependent on pedal thread length engagement

- Steel toe clips with 2 gates designed for single toe straps - Sold in pairs

- The ATAC 13/17° cleat works with all TIME mountain pedals. - Included with all mountain pedal models numbered "6" and higher - Release angles of 13 degrees or 17 degrees depending on how the cleat is set up on the shoe - Compatible with all two-hole cycling shoes.

- Fixie style straps that are compatible with most flat pedals - Provide the pulling power of straps with the easy release of clipless pedal system - Stiff, wide straps do not need toe clips

The DELTA standard requires a rotational movement of the foot toward the outside or inside for disengagement. This function improves cyclist's safety; no body or bearing prevents disengagement toward the inside. Compatible with non-KEO LOOK pedals, their contact area is wide for optimal comfort. They also feature a memory positioner to aid when changing cleats. - Use: Road & Indoor Bike - Material: Polyacetal + PTFE - Lateral adjustment: 4mm - Longitudinal adjustment: 12mm - Weight (pair + fasteners): 75g

Origin-8's Double Steel Toe Clips feature the classic toe clip look and style, with double strap compatibility. And, they are built to the same standards held for Japanese Keirin racing.

The ATAC cleats are developed for the TIME mountain bike pedal range (MX and XC range). By switching right and left cleats, you can choose two options for the release angle: 13-degrees or 17-degrees. - Weight: 45g/pair

RaceFace Chester Pedal Pin Kit 20 Pins Black

The Curve Sole Measurement Tool works in conjunction with the flat sole shims to correct the radius of flat sole shoes and prevent unwanted squeaking. There are 4 radius measurements, one per side, that measure the sole and indicate whether a shim is needed or not.

Longer rear load pins for the outer extremities of your pedals provide ultimate durability, while shorter front load center pins create a virtual concavity in the pin pattern, increasing grip without sacrificing pedal body thinness. - 28pcs rear load pins - 16pcs front load pins - Tool included

Traditionally, mountain cleats have only had two material options. Mild steel and brass. This has largely been to ensure that the cleat wore out faster than the pedal interface, but has left us with cleats that are often times very fast wearing, and in all cases, are quite heavy. Enter 6/4 Titanium, only slightly less hard than tool or spring steel used in the pedals, it's a remarkable 2.25 times stronger and 3 times tougher than brass or mild steel. Best of all, the extreme toughness and abrasion resistance of 6Al/4V titanium means that you can expect 300-400% wear life compared to traditional materials. Now we couldn't just stop there, but by combining 3D printing technology with this material that is 1/3 lighter than steel, we are able to achieve a cleat with internal lattice structure (called a gyroid) which maintains stiffness and strength while reducing weight to create a cleat set that is HALF the weight of a standard cleat set. This savings of 25-30 grams per set of cleats is significant over time, particularly in CX events where running is crucial. 25gm reduction x 100 rpm = 180kg of mass not lifted per hour of riding, 90kg per leg!

Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Look Keo System - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 45 grams/pair

The Blade Kit for the Keo Blade Carbon range is compatible with ceramic and Ti models. It allows you to replace the original blade or change the tension of your pedals to fit your requirements. 3 different tensions are available: 12 for standard use, 16 for sprinters and a recommended 20 for track cycling.

Replacement axles for Race Face Atlas pedals.

Official replacement cleats for Ritchey mountain bike pedals. - Includes a pair of cleats and mounting hardware - Compatible with Ritchey Pro-V4 and V5 mountain clipless pedals

- Cleats to fit Ritchey Echelon and Look Keo clipless pedals - Includes a pair of cleats and hardware

Origin-8's Look Delta Cleats are compatible with Look Delta-style pedals. - These cleats use the Look/SPD-SL bolt pattern.

- Fits most platform pedals - Two wooden riser blocks w/durable rubber band - Adds 3/4" to each side (1-1/2" total)

- City/road half clips - With reflectors - No straps needed - Resin

The ATAC Easy cleats are specifically for the mountain bike pedal and City Bike range of TIME (LINK, MX and XC range). The release angle of 10-degrees is easy for riders who want a quick step out. - Weight: 44g/pair

Bearing rebuild kit for Race Face Atlas pedals.

Crank Brothers' 5050 Pin Kit includes 40 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.

Kit Includes premium components: - Inner cartridge bearing x 2 - Outer cartridge bearing x 2 - Igus solid bearing x 2 - Inner seal x 2 - Bearing locknut x 2 - Spindle screw (Left) x 1 - Spindle screw (Right) x 1

A revolution in performance and reliability. The kit includes premium internal components: - Enduro catridge bearings - Enduro sealed needle bearing - Double seal system (internal and external seals) - Hex alloy end caps - O-rings, nuts - Sleeve bushings - Bearing removal tool

Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Mallet E - Model years 2016 – present

Pre-cut traction tabs designed to integrate with the Highline remote lever and increase grip for ultimate control.

- Look, Kéo 2 Max, Blades

- Allows a customer to replace their cleats. - Two replacement cleats in box

RaceFace Chester Pedal Spindle Kit Left/Right

- Shimano SPD-SL-style - Engineered thermoplastic injection body - Anti-slip walk pads - Fixed position with no float

The KEO cleat covers are designed to protect your KEO cleats while walking. Compatible with KEO GRIP and KEO CLEAT, these covers lengthen the life of your cleats and improve safety when walking thanks to an anti-slip surface. - Compatibility: KEO Grip/KEO Cleat - Use: Protect the cleat

Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Candy 7 & 11 - Model years 2016 – present

Bring power to every ride, on- or off-road. If you already own a compatible Garmin pedal-based power meter (Rally XC, Rally RK or Vector 3), use this conversion kit to easily swap your power sensor to new pedal bodies for use on another bike. This kit contains all the components you need to make the switch. NOTE: This product contains pedal bodies only, spindles and electronics are not included. In the box: - Left and right pedal bodies (SHIMANO SPD-SL style) - Replacement seals - 55 mm Q-factor washers - Battery doors

- Works with all XPRO and XPRESSO pedals. - Not included with new XPRO and XPRESSO pedals. - This is a zero-float cleat design, so there are zero (0) degrees of heel float and no lateral float along the pedal axle. - Compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.

- Works with all RXS and Impact pedals. - Five degrees of heel float and 2.5mm of lateral float along the pedal axle. - Compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.

- Allows a customer to convert any Rally 100 or 200 product over to RK/RS/XC pedal body styles.

The ultimate weight-saving upgrade.  - The kit includes: 1 pair titanium spindles + refresh kit (Enduro cartridge bearings, Igus ll-glide bearings, DSS double seal system: internal and external seals, hex alloy end caps, o-rings, nuts, sleeve bushings, & bearing removal tool). - Compatible with: Eggbeater, Candy, Mallet, 5050, Double Shot, model years 2010-present - Weight: 60g per pair - Spindle material: 6al/4v titanium - Max. rider weight: 200lb/90kg - Q-factor: 52 mm

- Custom pedal adaptor set - Allows foot to be fastened to any pedal front and rear - Great for lost mobility or handicap applications - Allows for up to size 13 shoe - Includes plates, hardware, and front/rear strap system

HEIGHT ADJUSTMENT WASHERS AND PINS FOR OUR ALUMINUM PEDALS KIT CONTAINS - 40 - HEXIGONAL TIPPED M4 THREADED SOCKET HEAD PINS - 40 - 0.8mm THICK HEIGHT ADJUSTMENT WASHERS

The XPro & Xpresso cleats have been developed for the TIME XPro & Xpresso road bike pedal range. They allow angular and lateral freedom in order to respect the natural movements of your legs and joints. You can also adjust the Q-factor (by switching the cleats) in order to optimize performance, following 3 points: security, ergonomics, and performance. The Bi-material brings more durability when walking with the cleats. These cleats are the stock cleats included with all XPro & Xpresso pedals.

Everything you need to fully rebuild your OneUp Aluminum Pedals. Our V2 kit is compatible with all OneUp Aluminum pedals. The brass bushings take the place of the 3 small cartridge bearings and aluminum washer that were on our original pedal assembly. KIT CONTAINS - 2 LARGE OUTER BEARINGS - 2 BRASS BUSHINGS - 2 OUTER SEALS - 2 FLANGE WASHERS - LH AND RH AXLE BOLTS - 2 AXLE O-RINGS - LH AND RH BEARING NUTS

- Specifically designed for boots and larger shoes - Steel toe clips with 4 gates designed for double toe straps - Sold in pairs

Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.

Dimension Nylon Basic Toe Straps -Durable metal buckle -Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution must be used to keep the strap tail out of the wheel) - 450mm

- Allows a customer to replace their cleats. - Two replacement cleats in box

A revolution in performance and reliability. - The kit includes premium internal components: - Inner spindle seal x 2 - Outer spindle seal x 2 - Inner Igus solid bearing x 2 - Outer Enduro cartridge bearing x 2 - Spindle nut x 2 - Outer bearing carrier x 2 - Compatibility: Doubleshot (2016), Doubleshot 2 (2017+), Soubleshot 3 (2017+)

- Heavy-duty nylon toe straps with classic style steel buckles - Narrow design fits most cage style pedals - 460mm length

The Cleat Screw Kit is a bike fitter's best friend because it eliminates the difficulty (and in some cases impossibility) of finding the perfect type and length of cleat screw. - The Kit contains 150 screws (15 different screw types/sizes with a quantity of 10 each) - SPD / MTB Compatible Cleat Screws - 4mm Hex countersunk M5x0.8, compatible with most 2-hole cleats, and are black oxide coated carbon steel. Kit includes 10 of each: 10mm (PD0219), 12mm (PD1576), 14mm (PD1577), and 16mm (PD1578). - Look / Shimano Compatible Cleat Screws - 4mm Hex Button Head M5x0.8, are compatible with most 3-hole cleats, and made from stainless steel with Nylock®. Kit includes 10 of each: 8mm (PD1579), 10mm (PD1580), 12mm (PD1581), 14mm (PD1582), 16mm (PD1583), 18mm (PD1584), and 20mm (PD1585). - Speedplay Walkable Compatible Cleat Screws - Phillips Recessed Button Head - M4x0.7, are 4-hole cleat compatible and made from stainless steel with Nylock®. Kit includes 10 of each: 9mm (PD1590), 11mm (PD1591), 13mm (PD1592), and 15mm (PD1593).

- Shimano SPD-SL-style - Engineered thermoplastic injection body - Weight of 24 grams per cleat - 4.5-degree floating arc

- Super-strong foot retention pedal strap system - Large Velcro and durable polyester top cover - Anti-Slip tension design - Fits most platform pedals - Will not fit standard cage pedals

Origin-8's SPD Cleats are compatible with Shimano SPD-style pedals. These cleats are single release.

Origin-8's Leather Toe Clip Straps are made from real, high-quality leather and feature the classic, double strap design.

Dimension Toe Straps. - Durable metal buckle - Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel) - 440mm length

The Activ Grip Trail Pads are compatible with our Trail Grip platform pedals. Built from extremely strong and durable material and designed in collaboration with outdoor specialist Vibram, they offer exceptional traction on the toughest rides. Their concave geometry is enhanced with large rubber lugs and composite studs for optimal foot stability and extreme durability to take on the challenges of any terrain.

Dimension Mini Toe Clips - Toe clips do not accept toe straps - Sold as a pair - Mounting hardware for the toe-clip is included