Wheels

Whisky No.9 40w Wheels are made to be wide, light, and versatile. Optimized for use with wide trail and plus-sized tires, the No.9 40w rims have a 35mm internal width, feature hookless beads for easy tubeless set up and impact resistance. The No.9 40w wheels offer stiff, lightweight performance gains across the board; these disc brake-specific wheels have a minimalist design and clean aesthetics. - Built with DT Swiss 350 hubs, 32 DT Competition Double Butted Spokes, and brass nipples to maximize performance and reliability - An ideal option for short- to mid-travel mountain bikes, plus tire set ups, or off-road touring rigs - Includes tubeless valves and pre-installed Whisky Tubeless tape with an additional roll for future use - Recommended weight limit: 240lbs - 50psi max tire pressure

Save energy on the climbs and rail rugged descents with higher speeds and total control. Mavic engineered the XA Pro Carbon to be significantly lighter and laterally stiffer than any aluminum wheel, but also retained the impact resistance and vertical compliance that gives Mavic Wheel-Tire Systems the ride quality they’re known for. The XA Pro Carbon is the lightest wheel system in its category (1490g for 27.5” and 1535g for 29”). So you know it helps you climb and accelerate faster, but where it really shines is in the way it handles rough and challenging terrain. Mavic engineered a wide 26mm hookless rim profile that’s fully UST Tubeless compliant for improved traction, puncture resistance and ease of use. These asymmetric rims are fine-tuned to optimize spoke tension and they use 24 double-butted steel spokes to find the sweet spot between lateral stiffness and vertical compliance. Hubs are 6-Bolt only and compatible with all current axle standards including Standard and Boost.

Discus Pro C35 is the entry-level wheelset of the 3T Discus range: Center Lock disc-brake hubs, 25mm-wide alloy rims, and 24F/24R spoking make this wheel sure-footed, versatile and rugged. 3T's linear+ system optimizes build quality, and asymmetric rim drilling reduces the difference in spoke tension between the drive side and non-drive side. The hubs have light, alloy oversize spindles with modular end-caps that can be easily swapped from quick-release to thru-axle as needed; rear width can run 135mm or 142mm to fit latest CX and gravel-grinder thru-axle framesets. Light, alloy rim is 32mm deep, with a blunt profile for stable aerodynamic performance at typical angles to the wind. The wide tire bed provides a really firm base to run the latest, race-weight fat tires at lower pressure, with the advantages of: - Wider contact surface and less rolling resistance - Reduced incidence of punctures - Better handling control

Mountain biking has always progressed, and the M 1900 SPLINE 30 is part of its progression. With today's breed of super capable trail bikes, wheels need to be up to the speed and terrain these bikes are capable of. DT developed the M 1900 30 just for these demands. With a highly resistant rim material and profile, and industry leading spoke and wheel building quality, it is more than ready to take up some wide rubber and dominate the mountain, no matter how big or rocky it may be.

The 303 brings a lot to the table, including heritage proven in the world's hardest races. At the center of the wheelset is Zipp's 77/177 hubset, which results in improved stiffness, durability, simplicity and versatility. The carbon wheel that helped pioneer the Firecrest rim platform for improved aerodynamics and crosswind stability also features the unspoken durability that has repeatedly won Paris Roubaix and the Tour of Flanders - Firecrest rim technology affords the rider more speed, more stability, and more strength. This technology offers stable, predictable handling, and the wider rim increases lateral stiffness while offering greater vertical compliance - Each wheel includes Zipp quick release skewer, end caps that can be swapped to run 12mm or 15mm thru axle; 1 Zipp 700c X 20mm rim tape, and 1 Zipp tubeless valve - 303 Firecrest Carbon Clincher Tubeless Disc Brake total wheelset weight is 1645 grams

The HE 1800 SPLINE 32 is the perfect wheelset to enter into the world of e-road biking. A super-reliable pair of wheels for your everyday e-road bike rides, the HE 1800 SPLINE 32 comes with e-road-specific components to handle that little bit of extra power and secure unlimited riding fun on the road. Whether you simply want to enjoy the extra support uphill or if you want those additional watts to hang with your elite racing friends, the HE 1800 SPLINE 32 is ready for every e-road challenge. Shimano/SRAM 11-speed road cassette-compatible

Best seller. You'll be hard-pressed to find a better wheel anywhere near these prices. - Cartridge bearing hub with solid axle

Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Baron S1 Wheelset - Use: Plus Tire Performance, Adventure, and Trail - Internal Rim Width: 35mm - Optimal Tire Size: 2.8 to 3.2-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock - Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (1,998g), 27.5-inch (2,060g), and 29-inch (2,162g)

Nowadays, bikers ride what used to be called downhill trails on enduro bikes. The trails are getting rougher, and the demands on the gear and rider are greater. The E 1900 SPLINE has been developed to deal with precisely these requirements. With its stiff aluminum rim, lightweight straight-pull spokes, and proven DT Swiss hubs, this wheel is well-prepared for any challenge. The balance of weight and stiffness will put a smile on your face whether you're riding uphill or downhill. After all, most of the best trails don't offer lift service.

Nowadays, bikers ride what used to be called downhill trails on enduro bikes. The trails are getting rougher, and the demands on the gear and rider are greater. The E 1900 SPLINE has been developed to deal with precisely these requirements. With its stiff aluminum rim, lightweight straight-pull spokes, and proven DT Swiss hubs, this wheel is well-prepared for any challenge. The balance of weight and stiffness will put a smile on your face whether you're riding uphill or downhill. After all, most of the best trails don't offer lift service.

The HG 1800 SPLINE 25 combines Swiss precision and noble reserve. On closer inspection of the reliable e-specific components, it is clear that this wheelset won't let you down. Reinforced spokes, e-bike-specific hub components, and a super-durable rim make for a high-quality wheelset at an attractive price point. - Shimano/SRAM 11-speed road cassette-compatible

With the T 1800 CLASSIC track style is taken to the streets. From the wide, medium profile alloy rim to the extra flat bladed spokes it oozes muscles. And that muscle is needed when zipping around cars and corners at full pace. Its simplicity comes from Swiss engineering know-how, ensuring a long, trouble free life navigating city roads and procuring big grins on riders faces. That said, it doesn't mean it can't go fast on an oval, because it can.

Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Crest S1 Wheelset - Use: Aggressive Cross Country and Trail - Internal Rim Width: 23mm - Optimal Tire Size: 2.0 to 2.25-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock - Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (1,649g ), 27.5-inch (1,731g), and 29-inch (1,813g)

Road bikes are ever evolving and ever inspiring. The new 404 Firecrest Carbon Clincher Tubeless Disc-brake wheelset offers cyclists everywhere the opportunity to experience superior braking and stopping power to match the speed and stability of SRAM's most popular and versatile 58mm rim depth. Aero has never been so affordable and attainable. The consistency and power of disc brakes provides precision modulation and stopping power, literally at your fingertips. As for speed, the 404 Firecrest is where the Firecrest Revolution began. If you had to choose just one wheel, the 404 Firecrest should be your choice. With a depth and shape proven in all conditions, it’s a classic all-around performer and the standard by which all other wheels are measured. At the center of the 404 Firecrest Carbon Clincher Tubeless Disc-brake is the durable and versatile 77/177D hubset, which offers options for riders to switch wheels from quick-release to thru-axle without tools. - Firecrest rim Technology provides world class handling and stability - 77/177d hubset, with its best-in-class durability and improved bearing protection, all with no pre-load adjustment needed - Aero performance, durable and Light Weight - To ensure compatibility with any bike, the versatile 77/177D hubs come with swappable end caps to work with QR’s and thru-axles - Tubeless ensuring secure performance even when ridden at lower tire pressures. - ISO 4210 compliant. See Declaration of Conformity for details.

Save energy on the climbs and rail rugged descents with higher speeds and total control. Mavic engineered the XA Pro Carbon to be significantly lighter and laterally stiffer than any aluminum wheel, but also retained the impact resistance and vertical compliance that gives Mavic Wheel-Tire Systems the ride quality they’re known for. The XA Pro Carbon is the lightest wheel system in its category (1490g for 27.5” and 1535g for 29”). So you know it helps you climb and accelerate faster, but where it really shines is in the way it handles rough and challenging terrain. Mavic engineered a wide 26mm hookless rim profile that’s fully UST Tubeless compliant for improved traction, puncture resistance and ease of use. These asymmetric rims are fine-tuned to optimize spoke tension and they use 24 double-butted steel spokes to find the sweet spot between lateral stiffness and vertical compliance. Hubs are 6-Bolt only and compatible with all current axle standards including Standard and Boost.

Save energy on the climbs and rail rugged descents with higher speeds and total control. Mavic engineered the XA Pro Carbon to be significantly lighter and laterally stiffer than any aluminum wheel, but also retained the impact resistance and vertical compliance that gives Mavic Wheel-Tire Systems the ride quality they’re known for. The XA Pro Carbon is the lightest wheel system in its category (1490g for 27.5” and 1535g for 29”). So you know it helps you climb and accelerate faster, but where it really shines is in the way it handles rough and challenging terrain. Mavic engineered a wide 26mm hookless rim profile that’s fully UST Tubeless compliant for improved traction, puncture resistance and ease of use. These asymmetric rims are fine-tuned to optimize spoke tension and they use 24 double-butted steel spokes to find the sweet spot between lateral stiffness and vertical compliance. Hubs are 6-Bolt only and compatible with all current axle standards including Standard and Boost.

Introducing the Gravel racing king — GRC 1400 SPLINE 42, the most sophisticated gravel wheelset on the market. Taking a holistic approach to engineering, we rethought the characteristics of a modern benchmark-setting gravel wheelset. Aerodynamic efficiency for sustainable speed and endurance, ideal support of wide gravel tires for unprecedented comfort and traction off-road, as well as remarkable durability make this wheelset the perfect companion for your next gravel adventure. - Shimano/SRAM 11s road cassette-compatible

Sta-Tru Double Wall Front Wheels. - Hub/Brake Compatibility: Rim Brake - Wheel Size: 700c - ISO Diameter: 622 / road / 29" - Front Axle: QR x 100mm - Valve: Schrader - Tire Type: Clincher

Whisky No.9 30d carbon road wheels deliver leading edge, tubeless performance across a broad range of drop bar disciplines. The No.9 30d road rims offer a lightweight, stable platform with a wide internal width that pairs well with 25-35c tires. These disc brake-specific wheels have clean lines and provide great versatility from tarmac to gravel, brevets to the CX course. These wheels are Whisky’s lightweight go-to choice for all-around performance. - Centered around DT Swiss 350 hubs, well-known for their balance of performance, weight and tool-free serviceability - Laced with j-bend DT Aerolite spokes and brass nipples for durability and serviceability - Each wheel includes a Whisky tubeless valve and tape

What It Is The G23 is the definition of a true gravel wheelset. At 330 grams, ENVE's lightest 700c tubeless rim accelerates quickly and ascends with ease. Armed against pinch flats with the patent-pending Wide Hookless Bead, the G23 is tough and relentless on road, path, or trail. The G23 is a 700c tubeless carbon clincher wheelset with a generous 23mm internal width, specifically conceived to meet the performance and ride quality demands of serious mixed-surface cyclists. Who It's For Created for those seeking to discover new experiences, new terrain, and new challenges. Built to reflect the versatility of today's gravel and mixed surface riders, these wheels will excite ambitious, daring, and indomitable riders everywhere. If your path leads to classics like Dirty Kanza, Landrun, Crusher in the Tushar, or a new wave of events like Grinduro or Lost and Found, the G23 is your wheel. Why We Made It There is a place between road and mountain that is open to discovery. Beyond the range of your trail bike or the capabilities of your road bike. Terrain littered with contradicting challenges and demanding requirements are at odds with the bikes and products available today. We built the new G23 to thrive in this new environment, because insights gained through building the world's best road and mountain bike rims told us that the perfect combination did not exist in our stable, or in our opinion, anywhere at all. The higher volume and lower pressures would demand MTB toughness and flat resistance, while big days and long miles would require the lightweight and efficiency of a road machine. Above all, the combination of rough and rigid would require a wheel with the ride quality to make those long miles enjoyable and multi-day treks possible.

Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Flow S1 Wheelset - Use: Aggressive Trail, All Mountain, Enduro, and Downhill - Internal Rim Width: 29mm - Optimal Tires Size: 2.35 to 2.8-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 27.5-inch (2,034g), and 29-inch (2,134g)

Whether you're looking to take it to the limit on a climb or throw down in a sprint, Campagnolo's Bora One 35 wheels are where it's at. Their 35mm deep-dish carbon rims and aero spokes are exactly what you need to slice through the wind and move to the head of the pack. They're also feathery light to give you a boost when the road turns uphill. And, the aluminum hubs house USB hybrid ceramic bearings for a zippy ride. Plus, the Boras come with Campy's legendary quick-releases, too. - 35mm carbon rim means greatly reduced weight - Clincher version ensures easier bike maintenance and management - The rim has exactly the same structure as that of top-of-the-range wheels - The aluminum hubs and ceramic USB bearings ensure performance at a lower price - 35mm high rim gives this wheel good performance on long stretches on the flat where even the aerodynamic factor is important - All the Campagnolo knowhow in the field of carbon makes this wheel lightweight and perfect for longer steeper climbs - Number of spokes: 18 Front, 21 Rear - RDB – Rim Dynamic Balance - Bladed aerodynamic spokes - Stainless steel spokes - Ultralinear/DRSC geometry - Aluminum nipples - Weight: 1405 grams Included: - Special brake pad kit for carbon wheels (red compound): 40% better braking performance in wet conditions and 20% in dry. - New Quick Release wheels with a totally redesigned aerodynamic profile, lighter and with a shiny finish. - Valve extender

Sta-Tru Double Wall Front Wheels. - Hub/Brake Compatibility: Rim Brake - Wheel Size: 26-inch x 1 3/8 - ISO Diameter: 590 / 26 x 1 3/8-inch - Front Axle: 3/8-inch x 100mm - Valve: Schrader - Tire Type: Clincher

The Rampage rear wheel rolls on a four-bearing sealed freecoaster hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system. - Axle: 14mm chromoly (heat-treated) - Driver: 1-pc chromoly RHD or LHD - Hardware: Steel(17mm wheel nuts) - Hub shell bearings: 6002 (x1) & 7902 (x1) verify bearing number on side of rubber seal - Drilling: 36H - Weight: 46.4-ounces

This wheel matches original equipment for Surly Long Haul Trucker.

Mountain bikes are becoming longer, slacker, and faster. The M 1900 SPLINE 30 is our answer to these developments. The rim is very durable and offers a 30mm rim width, which eliminates tubeless tire burping and allows you to reduce the tire pressure to keep you in greater control. Twenty-eight cold-forged spokes tension the rim in a DT Swiss straight pull hub to provide the ultimate balance of light weight and stiffness. No matter how steep or how rocky your trail, the M 1900 SPLINE is more than up to the challenge.

Quality Wheels Value Series Disc Rear Wheel 26 SRAM 406 6-bolt / Sun SR25 Black

Nowadays, bikers ride what used to be called downhill trails on enduro bikes. The trails are getting rougher, and the demands on the gear and rider are greater. The E 1900 SPLINE has been developed to deal with precisely these requirements. With its stiff aluminum rim, lightweight straight-pull spokes, and proven DT Swiss hubs, this wheel is well-prepared for any challenge. The balance of weight and stiffness will put a smile on your face whether you're riding uphill or downhill. After all, most of the best trails don't offer lift service.

There's something incredibly pure about trail riding—the feeling of exploration and the satisfaction of cleaning a technical section are hard to beat. It’s just you versus the terrain, so you need gear that won’t let you down. XA wheels give you the confidence and control to enjoy the ride. They are built with an asymmetric, sleeved rim that’s wide (30mm internal), lightweight, and strong. They also feature our UST Tubeless Ready technology, which makes it easy to enjoy the benefits of tubeless tires, including better control and traction along with a reduced risk of punctures. Straight pull spokes save weight without sacrificing strength or durability. The hubs are fine-tuned with our new ID 360 freehub, which is compatible with all axle sizes as well as XD drivetrains. The wheels are compatible with most modern standards, such as 15x100/12x142 and can easily be converted to other options (9x100 front, 9/12x135 rear) with optional adapters. Added confidence and control on the trail - Wider rim allows more air volume in the tire for better comfort. - Straight-pull spokes reduce weight while ensuring optimal stiffness and reliability. Better comfort and traction, plus a reduced risk of punctures - UST Tubeless Ready design makes it easy to experience the benefits of riding without tubes. - Wheelset comes with UST tubeless valves and rim strips. Accessible entry point to Mavic technologies - Straight-pull spokes - New ID 360 freehub and lightweight sleeved rim design

The HG 1800 SPLINE 25 combines Swiss precision and noble reserve. On closer inspection of the reliable e-specific components, it is clear that this wheelset won't let you down. Reinforced spokes, e-bike-specific hub components, and a super-durable rim make for a high-quality wheelset at an attractive price point.