Filter By:

  • Show More Brands

  • Show Fewer Brands

650B

Whisky Parts Co. No.9 50d Rear
$875.00
Whisky No.9 50d wheels deliver stable and robust performance, both on and off the road. The No.9 50d rims offer a lightweight, aero platform with a wide internal width that pairs well with 25-35c tires. These disc brake-specific wheels have clean lines and provide great versatility from tarmac to gravel, brevets to the CX course. - Centered around DT Swiss 350 hubs, well-known for their balance of performance, weight and tool-free serviceability - Laced with j-bend DT Aerolite spokes and brass nipples for durability and serviceability - Each wheel includes a Whisky tubeless valve and tape
DT Swiss H 1700 Spline 30
$394.00 - $526.00
It's a fact: On an E-MTB you run into trail sections much faster than you have ever before considered possible. The H 1700 SPLINE 30 has the power to get you out of such situations as a winner and not face down in the dirt. Steering precision is covered by the strong spokes and the trademark DT Swiss wheel build with high and even spoke tension. The rim can take tires suited for fast riding on rugged terrain and supports them perfectly, even at low pressures. Reliable Ratchet System hubs finally make sure that you can come back and attack those gnarly sections of trail time and time again.
Mavic XA Pro Carbon 27.5-inch Rear
$1,059.95
Save energy on the climbs and rail rugged descents with higher speeds and total control. Mavic engineered the XA Pro Carbon to be significantly lighter and laterally stiffer than any aluminum wheel, but also retained the impact resistance and vertical compliance that gives Mavic Wheel-Tire Systems the ride quality they’re known for. The XA Pro Carbon is the lightest wheel system in its category (1490g for 27.5” and 1535g for 29”). So you know it helps you climb and accelerate faster, but where it really shines is in the way it handles rough and challenging terrain. Mavic engineered a wide 26mm hookless rim profile that’s fully UST Tubeless compliant for improved traction, puncture resistance and ease of use. These asymmetric rims are fine-tuned to optimize spoke tension and they use 24 double-butted steel spokes to find the sweet spot between lateral stiffness and vertical compliance. Hubs are 6-Bolt only and compatible with all current axle standards including Standard and Boost.
Mavic XA Elite WTS 27.5-inch Front
$352.45
The XA Elite was born to meet the needs of adventurous trail riders to push the limits on challenging terrain. Lightweight, strong and engineered to deliver confidence and control, it boasts purpose-built features for off-road performance. The first thing that sets this Wheel System apart from the competition is its rim. It uses Mavic's patented ISM 4D technology to remove all but the most necessary material. This means snappier acceleration and a more dynamic ride quality. A new wider (25mm internal width) rim features UST technology so it’s easier to experience the improved traction and control of tubeless tires. The rims are laced to Mavic's proven QRM hubs for smooth, dependable performance no matter how rough the conditions. The ITS-4 freehub delivers fast engagement to further enhance the dynamic feel. The entire wheel system weighs an impressive 1695g for 27.5".
Mavic XA Pro Carbon 27.5-inch Front
$939.95
Save energy on the climbs and rail rugged descents with higher speeds and total control. Mavic engineered the XA Pro Carbon to be significantly lighter and laterally stiffer than any aluminum wheel, but also retained the impact resistance and vertical compliance that gives Mavic Wheel-Tire Systems the ride quality they’re known for. The XA Pro Carbon is the lightest wheel system in its category (1490g for 27.5” and 1535g for 29”). So you know it helps you climb and accelerate faster, but where it really shines is in the way it handles rough and challenging terrain. Mavic engineered a wide 26mm hookless rim profile that’s fully UST Tubeless compliant for improved traction, puncture resistance and ease of use. These asymmetric rims are fine-tuned to optimize spoke tension and they use 24 double-butted steel spokes to find the sweet spot between lateral stiffness and vertical compliance. Hubs are 6-Bolt only and compatible with all current axle standards including Standard and Boost.
Mavic XA Elite WTS 27.5-inch Rear
$397.45
The XA Elite was born to meet the needs of adventurous trail riders to push the limits on challenging terrain. Lightweight, strong and engineered to deliver confidence and control, it boasts purpose-built features for off-road performance. The first thing that sets this Wheel System apart from the competition is its rim. It uses Mavic's patented ISM 4D technology to remove all but the most necessary material. This means snappier acceleration and a more dynamic ride quality. A new wider (25mm internal width) rim features UST technology so it’s easier to experience the improved traction and control of tubeless tires. The rims are laced to Mavic's proven QRM hubs for smooth, dependable performance no matter how rough the conditions. The ITS-4 freehub delivers fast engagement to further enhance the dynamic feel. The entire wheel system weighs an impressive 1695g for 27.5 and 1770g for 29''. The XA Elite is available in 15x100 and 12x142 (both convertible to quick release) or Boost (15x110 and 12x148) in 27.5”.
DT Swiss M 1900 Spline 30
$196.00 - $302.00
Mountain biking has always progressed, and the M 1900 SPLINE 30 is part of its progression. With today's breed of super capable trail bikes, wheels need to be up to the speed and terrain these bikes are capable of. DT developed the M 1900 30 just for these demands. With a highly resistant rim material and profile, and industry leading spoke and wheel building quality, it is more than ready to take up some wide rubber and dominate the mountain, no matter how big or rocky it may be.
DT Swiss EX 1501 Spline ONE 25
$539.00 - $750.00
The Enduro incarnation of the SPLINE ONE line-up. Based on a rim that has survived top to bottom runs without a tire under world class riders such as Aaron Gwin, the EX 1501 SPLINE ONE 25 has nothing to prove when it comes to strength. For Enduro racers it comes in handy that it features tech details like the specially developed rim surface hardening process for increased durability at no additional weight. Being built of DT's highest-end components through and through, it should come as no surprise that Jared Graves and Richie Rude have been dominating the EWS on this exact wheelset.
DT Swiss EX 1501 Spline ONE 30
$565.00 - $776.00
With even the EWS race courses getting tougher and tougher and tire manufacturers offering Enduro-strong tires in 2.5-inch sizes, the demand from DT's pros for a wide, Enduro tough wheelset came up and DT responded by developing the EX 1501 SPLINE ONE 30. Often used as a front wheel to generate as much grip where you need it most, it is the wheel for those hunting after the toughest of tracks or those living right in the Alps. Strong, lightweight, and tough as nails, the EX 1501 30 is ready for just about anything.
Stan's NoTubes Arch CB7 27.5-inch Rear
$720.00
Stan's Arch CB7 is the ultimate carbon trail wheel. It's light enough to respond instantly from the first pedal stroke, and durable enough for the Enduro World Series circuit. With a focus on ride quality, the Arch CB7 features a special layup and shape that deflects up to 10mm radially to soak up speed-robbing impacts, all while being laterally stiffer than just about every other carbon and alloy rim on the planet. The Arch CB7 rims also feature Stan's patented Bead Socket Technology, the original tubeless-ready rim design that has become the foundation of all current tubeless-ready systems. This wheel rolls on an updated Neo hub featuring a Durasync 6-pawl freehub with fast 10-degree engagement. The 100% CNC-machined hub shell and smoother-rolling centerless ground axle help ensure long life and reliable performance. - Arch CB7 wheels include pre-installed tubeless tape and presta valves - Designed for trail riding and enduro racing - Low-profile sidewalls promote proper tire shape and reduce rim weight - 100% CNC-machined hubs with 6-pawl simultaneous engagement - Sapim Race 2.0/1.8/2.0 spokes with Secure Lock aluminum nipples - RiACT system absorbs impacts and rolls faster - Patented Bead Socket Technology rim shape offers easier tubeless inflation and more reliable seal - WideRight rim design optimized for 2.25 - 2.50" tires
Sun Ringle Mulefut 50SL Wheelset
$209.99 - $289.99
A new method of attacking the trail is on the horizon and about to take the mountain bike community by storm. PLUS SIZED 3.0 tires provide faster acceleration combined with increased tire patch for superior traction and added cushion. Introducing the SUNringlé Mulefüt 50! PRODUCT SPECS: - STR SUNringle Tubeless Ready - 50mm rim width - Premium cartridge bearing straight pull hubs - Quick release front axle 100x15 and 110x15 - Rear axle options: 142x12, 148x12 - Wheelsmith straight pull double butted spokes - Wheelsmith brass nipples - 32 hole count - Weight / Set: 2220g (27.5") 2310g (29")
Spank 350 Vibrocore 27.5-inch Wheelset
$699.00
- High performance Wheelset with internal vibration damping, ideal for DH and Freeride. - Unique profile with low sectional profile height and wide width, which adds radial compliance, while keeping high lateral stiffness. - Improved radial compliance for better traction over bumps and chatter, while reducing negative feedback to the rider. Performance and comfort enhanced. - Vibrocore inner well, reduces the transmission of harmful vibration frequencies, meaning less vibration for the suspension and rider, also increasing the fatigue life of the rim. - 30mm internal width extremely versatile, fitting tires from 2.0” to 2.6” perfectly, and even allowing + size tire use, without negative squaring off of tire profiles.
Stan's NoTubes Arch S1
$201.00 - $479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Arch S1 Wheelset - Use: Trail and Enduro - Internal Rim Width: 26mm - Optimal Tire Size: 2.25 to 2.5-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 27.5-inch (1,882g) and 29-inch (1,974g)
Stan's NoTubes Baron S1
$201.00 - $479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Baron S1 Wheelset - Use: Plus Tire Performance, Adventure, and Trail - Internal Rim Width: 35mm - Optimal Tire Size: 2.8 to 3.2-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock - Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (1,998g), 27.5-inch (2,060g), and 29-inch (2,162g)
Stan's NoTubes Crest S1
$278.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Crest S1 Wheelset - Use: Aggressive Cross Country and Trail - Internal Rim Width: 23mm - Optimal Tire Size: 2.0 to 2.25-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock - Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (1,649g ), 27.5-inch (1,731g), and 29-inch (1,813g)
Stan's NoTubes Flow S1
$289.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Flow S1 Wheelset - Use: Aggressive Trail, All Mountain, Enduro, and Downhill - Internal Rim Width: 29mm - Optimal Tires Size: 2.35 to 2.8-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 27.5-inch (2,034g), and 29-inch (2,134g)
Stan's NoTubes Arch MK3 27.5 Rear Wheels (SRAM XD)
$370.00
Designed with input from Stan's Enduro World Series teams, the new Arch MK3 is ready to own every trail. WideRight optimized for maximum stability with 2.25" to 2.5" tires, Stan's expanded the internal width out to 26mm while keeping the rim incredibly light. The 27.5" Arch MK3 weighs only 425g. A new proprietary alloy and stronger, low-profile rim shape means the new Arch MK3 is built to last. Featuring Bead Socket Technology, the new Arch MK3 also offers the unmatched traction, control, and reliability only found on genuine Stan’s NoTubes rims. - The perfect balance of strength and weight - 24% wider than the Arch EX for improved stability with larger tires - Same light weight as the Arch EX - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - 25% stiffer and stronger for improved handling - Lighter and more durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - WideRight optimized for Trail tires / 2.25 - 2.50 - Includes pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release.
Stan's NoTubes Flow MK3 27.5 Rear Wheels
$370.00
The new Flow MK3 is wider, stronger, and lighter. The Flow’s legendary history on the World Cup DH circuit, combined with WideRight 29mm internal width offers the perfect balance of tire stability for outstanding control at any speed. Genuine Bead Socket Technology rolls faster, corners harder, and withstands even bigger hits. Combined with a new shape, the Flow MK3 is born and bred for control at speed and perfect for technical trails and enduro racing. Laterally stiffer and more durable, the new alloy is also even lighter, putting the new Flow MK3 in a class by itself for all-mountain performance. Flow MK3 wheels include: pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release. - 29mm internal width for tires up to 2.8-inches - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Even lighter than the Flow EX - Laterally stiffer and stronger for improved handling - 25% stiffer and stronger for improved handling - More durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Built on the proven success of the Flow EX on the World Cup DH circuit - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples
SRAM Rise 60 27.5-inch Front Wheel
$950.00
When unparalleled speed and pedaling efficiency is what you desire, SRAM's Rise 60 Front Wheel rises to the occasion. This featherweight hoop with Carbon Tuned rims and butted stainless spokes blend just enough strength and stiffness with an impeccably low weight. Once they start spinning, there's almost no stopping the incredibly smooth, durable Speedball Ceramic bearings. The hook-less rim design results in a wheel that’s lighter, stronger and more resistant to the impact of XC racing. DOUBLE TIME hub and pawl geometry integrates seamlessly with any ride for a frictionless experience on the trail. Quicker bursts, tighter turns, better rolling and easier climbs. Softer landings and smoother descents. Bigger wins. Louder cheers. Every wheel connects you to the ground. Only a few can carry you to new heights. - Intended use: XC and Trail - CARBON TUNED rim for tubeless clinchers - Customizable decal kit - Front axle compatibility: 9x100 QR, 9x100 QR OS, 15x100 - Tire Type: Tubeless Ready Clincher - Rim Joint: Carbon - Eyelets: None
Santa Cruz Reserve 37 27.5-inch Wheelset
$1,599.00 - $2,199.00
Five years ago, Santa Cruz debunked every skeptic's fear about the long-term durability of carbon fiber bicycle frames. Now they are doing the same for wheels. Santa Cruz Reserve wheels are built on the highest quality carbon rims on the market. Their confidence in the design and strength of the wheels is backed up by a lifetime warranty, just like Santa Cruz frames.
Santa Cruz Reserve 30 27.5-inch Wheelset
$1,599.00 - $2,199.00
Five years ago, Santa Cruz debunked every skeptic's fear about the long-term durability of carbon fiber bicycle frames. Now they are doing the same for wheels. Santa Cruz Reserve wheels are built on the highest quality carbon rims on the market. Their confidence in the design and strength of the wheels is backed up by a lifetime warranty, just like Santa Cruz frames.
DT Swiss M 1700 Spline 25
$348.00 - $519.00
Rainy days, wet soil, rocks and roots. The tubeless tires somehow find grip. The M 1700 SPLINE 25 comes stock with tubeless rim tape and valves, just the right tool for demanding trails. The wide rim gives the tire that decisive little bit more support while the Ratchet System freewheel ensures safe engagements even in the most averse conditions. Finally, being a lightweight helps you to quickly get back up to that trail entrance, to start the slip-and-grip fest all over again.
DT Swiss XM 1501 Spline ONE 30
$565.00 - $776.00
The XM 1501 SPLINE ONE 30: a whole lot of wheel. Fit with high volume tires it will eat up the roughest of descents you can throw at it, and it will climb to those trailheads with ease. Really the perfect size for demanding all mountain riders, it features DT's famous aluminum rim construction, proven on World Cup downhill and EWS levels. The DT Swiss wheel build quality and the unmatched Ratchet System hubs complement this extremely capable package, made to dominate the mountain.
Whisky Parts Co. No.9 30w Rear 27.5-inch
$875.00
Whisky No.9 30w carbon tubeless wheels are the most versatile performance wheels offered by Whisky. The No.9 30w rims have a 24mm internal width that supports a variety of tires from road plus to standard mountain sizes and feature hookless walls for easy tubeless setup and impact resistance. The No.9 30w wheels are light and wide, providing great versatility no matter where your ride takes you. - Centered around DT Swiss 350 hubs, well-known for their balance of performance, weight and tool-free serviceability - Laced with j-bend DT Aerolite spokes and brass nipples for durability and serviceability - Includes Whisky tubeless valves and tape
Whisky Parts Co. No.9 40w Front 27.5-inch
$725.00
Whisky No.9 40w Wheels are made to be wide, light, and versatile. Optimized for use with wide trail and plus-sized tires, the No.9 40w rims have a 35mm internal width, feature hookless beads for easy tubeless set up and impact resistance. The No.9 40w wheels offer stiff, lightweight performance gains across the board; these disc brake-specific wheels have a minimalist design and clean aesthetics. - Built with DT Swiss 350 hubs, 32 DT Competition Double Butted Spokes, and brass nipples to maximize performance and reliability - An ideal option for short- to mid-travel mountain bikes, plus tire set ups, or off-road touring rigs - Includes tubeless valves and pre-installed Whisky Tubeless tape with an additional roll for future use - Recommended weight limit: 240lbs - 50psi max tire pressure
DT Swiss M 1700 Spline 30
$374.00 - $532.00
Just wide enough, just light enough. At 30mm internal rim width the M 1700 SPLINE 30 works for tires ranging from slightly wide to quite wide, allowing it to attack the hardest terrain. But with a high-end build, butted spokes, patented alloy Pro Lock nipples and the benchmark Ratchet System hubs, it still comes in at a low weight. Low weight means it's very reactive to rider input. Reactive means fun, and fun is why we are all doing this, right?
DT Swiss XR 1501 Spline ONE 25
$552.00 - $750.00
Responding to the demand from top racers for even wider rims, DT have developed an XC-specific 25mm-wide rim profile. This is what's built into the XR 1501 SPLINE ONE 25. The result is a super capable, super light Cross Country wheel. It feels perfectly at home on the trails that have become tougher and rougher both up and down the mountain. And built with DT Swiss quality in every detail, from the hub internals to the spoke nipple, it makes sure you complete all the laps, weekend after weekend.
Stan's NoTubes Arch CB7 27.5-inch Front
$679.00
Stan's Arch CB7 is the ultimate carbon trail wheel. It's light enough to respond instantly from the first pedal stroke and durable enough for the Enduro World Series circuit. With a focus on ride quality, the Arch CB7 features a special layup and shape that deflects up to 10mm radially to soak up speed-robbing impacts, all while being laterally stiffer than just about every other carbon and alloy rim on the planet. The Arch CB7 rims also feature Stan's patented Bead Socket Technology, the original tubeless-ready rim design that has become the foundation of all current tubeless-ready systems. This wheel rolls on an updated Neo hub featuring smoother-rolling centerless ground axle help ensure long life and reliable performance. - Arch CB7 wheels include pre-installed tubeless tape and presta valves - Designed for trail riding and enduro racing - Low-profile sidewalls promote proper tire shape and reduce rim weight - 100% CNC-machined hubs - Sapim Race 2.0/1.8/2.0 spokes with Secure Lock aluminum nipples - RiACT system absorbs impacts and rolls faster - Patented Bead Socket Technology rim shape offers easier tubeless inflation and more reliable seal - WideRight rim design optimized for 2.25 - 2.50" tires
3T Discus Plus Team C30 650B Rear
$1,045.00
The Discus Plus C30 Team is 3T's carbon wheelset from the Discus Plus range of 27.5-inch wheels: Center Lock disc-brake hubs, 34mm wide, tubeless-ready rims, and 24F/24R spoking make this wheel ideal for new-wave adventure bikes. The Team wheels exploit carbon's lightweight properties to go to 28mm inner width. The Discus Plus build is similar to Discus, utilizing the 3T linear+ system with asymmetric rim drilling to reduce the difference in spoke tension between the drive side and non-drive side. Hubs have light, alloy oversize spindles with modular end-caps that can be easily swapped from quick-release to thru-axle as needed; rear width can run 135mm or 142mm.
Spank Oozy Trail 345 Wheelset
$649.00
Up your width, up your traction, up your stoke! SPANK Industries’ OOZY Trail 345 Wheelset is hand built and trued to industry leading standards. 32H straight-pull OOZY Trail Hubs offer increased engagement and adaptability, and utilize unique over-sized SSL (single spoke length) flanges to improve contact and support between spokes, delivering enhanced stiffness, durability, and spoke torque retention. Laced with Spank’s 30mm internal width OOZY Trail 345 Rims, the OOZY Trail 345 Wheelset combines the strength and rigidity of SPANK’s patented Oohbah reverse-well rim profile with the unparalleled tubeless performance of Bead Bite anti-burp rim hooks. The result is a wide-set, bombproof wheelset that’s both lightweight and comfortable on any terrain. - Key technologies: Bead Bite, OohBah, Bead Nip, Dynamal Alloy, MGR - Freehub: alloy - Shimano (XD available) - Adapters Included (mm): FRONT: 20x110 REAR: QRx135 - Adapters Available (mm): FRONT: QR / 15x100 / 20x110 REAR: QRx135 / 10x135 / 12x135 / 12x142 - Tubeless: Tubeless equipped (tape & valves included) - Discipline: trail
Page 1 of 3 Next page