Cassettes/Freewheels

Thanks to Campagnolo's Ultra-Drive system, the Veloce Cassette offers precise, fluid shifting. The teeth are carefully machined and treated for flawless gear changes and outstanding durability. Plus, the special cog patterns interface perfectly with the rest of Campy's drivetrain components for outstanding shifting.

Ride anywhere with this wide range XG-1275 cassette—it always provides the right gear. Fast on the flats. Control on the climbs. Dictate your own pace, anywhere. FULL PIN technology uses lightweight, stamped steel cogs held together with high-strength stainless steel pins. The result: a cassette that’s light and strong. The open design similar to SRAM's X-DOME cassette aids in mud clearance, giving you cleaner shifting performance and longer component life. X-GLIDE2 improves both inboard and outboard shifting, as well as chain retention. - Cassette Body Type: SRAM XD Cogs: - 10 – 50T: 10, 12, 14, 16, 18, 21, 24, 28, 32, 36, 42, 50 - 10 – 52T: 10, 12, 14, 16, 18, 21, 24, 28, 32, 36, 42, 52

- Shimano 105 R7000 Series CS-R7000 11-speed cassette - Average weight: 284 g (11-28T), 304 g (11-30T), 320 g (11-32T), 269 g (12-25T) Combinations: - 11 – 28T: 11-12-13-14-15-17-19-21-23-25-28T - 11 – 30T: 11-12-13-14-15-17-19-21-24-27-30T - 11 – 32T: 11-12-13-14-16-18-20-22-25-28-32T - 12 – 25T: 12-13-14-15-16-17-18-19-21-23-25T

• Steel construction on all but the largest aluminum gear • Nickel-plated finish for corrosion and wear resistance • Dyna-sys 11-speed cassette with "Rhythm step" gearing for closer gear ratios and smoother shifting performance • Fits Dyna-sys 11-speed and current Shimano 9/10-Speed MTB hubs • The largest cog (40t) is positioned inboard and above the drive-side flange • Hubs with tall drive-side flanges may not be compatible due to spoke interference

The Shimano Deore XT CS-M8100 12-speed cassette is optimized with rider-tuned wide-range and close step gear combinations for MTB excellence. - Shift ramp designs provide fast and smooth shifts by HYPERGLIDE+ technology - Light and stiff construction reduces cassette inertia resulting in faster acceleration and increased chain security - Designed with a Shimano Micro Spline body that features smaller and more widely distributed splines to limit cog damage on freehub - Cassette Body Type: Shimano Micro Spline - Cassette Cogs: 10-12-14-16-18-21-24-28-33-39-45-51 - Drivetrain Speeds: 12 - Range: 10-51

The workhorse of X-Range gearing, the SRAM RED XG-1290 cassette progresses fluidly and quickly through a wider range of gears. It's specifically designed for wireless electronic shifting and the one-piece design offers you the best in weight savings. - Updated design for smoother and faster shifting - More gradual gear progression between cogs—at least five one-tooth jumps—while still offering a wider range - 10-tooth start helps provide a wider gearing range - Designed to work with an XDR driver body - One-piece machined steel X-Dome design for weight savings - All Zipp wheels starting from 2012 are XDR ready - Version: D1 - 10-26T: 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 23, 26 - 10-28T: 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 24, 28 - 10-33T: 10, 11, 12, 13, 14, 15, 17, 19, 21, 24, 28, 33

Shimano Deore M6000 Series 10-speed cassette. - Cogs: 11-13-15-17-19-21-24-28-32-36T

SRAM's 1170 11-Speed Cassette is constructed of light, durable materials and boasts SRAM's PowerGlide tooth profiles and shift ramps for quick, positive gear changes. This excellent cassette also sports a semi-spider construction for a maximum stiffness-to-weight ratio, a lightweight aluminum lockring, and is available in three ranges to suit all your riding.

- CNC-machined from hardened chromoly with phosphate black finish - Threaded track cog for 1.37"x24tpi (right handed) threads - Choose 3/32" or 1/8" widths (Use SF-1750 for lockring)

- Optimized 11-speed tooth design for shifting speed and fluidity. Evolved sprocket timing reduces stress on the chain and allows for easier shifting through the higher cogs - Top six cogs are divided into sets of three and are mounted on aluminum carriers. This increases rigidity by 180% and the individual cogs are 70% more resistant to torsion - Cogs are steel with a nickel-chrome treatment - Only compatible with 2015+ mechanical drivetrains and no EPS, due to chain wrap capacity Cassette Body Type: Campagnolo 10/11-speed Cassette Cogs: 11-12-13-14-15-17-19-21-23-26-29 Cassette Spacing: Campagnolo 11-speed Range: 11-29 Weight: 230g

Shimano's Ultegra 11-Speed Cassette delivers pro-level shifting and durability. The computer-designed tooth shapes and tough cogs mean you can shift quickly, precisely and smoothly even under pressure. Rider-tuned gearing options offer a range of cassettes to suit your riding style.

- For IG/HG chains - Zinc phosphate finish - Enlarged sprocket window design for ligtherweight

A range of sturdy, affordable cogs is an essential part of a fixie rider's quiver. Origin-8's Track Cog is available in a variety of sizes and is chrome plated to resist rust and increase longevity. Now you can easily tailor your ride for the terrain. And you can choose between 1/8 and 3/32-inch chain widths.

Dimension Steel Cogs are splined for BMX and singlespeed hub compatibility. - Steel with chrome finish - Cogs are splined for Shimano BMX and singlespeed hub compatibility - Compatible with 1/2-inch and 1/8-inch chains

- Converts any 8-10sp HG splined cassette hub to a Singlespeed - 3/32" cogs. 14mm and 19mm spacers can be swapped to fine tune chainline

The Acolyte 8-speed cassette gives you all the range you need to challenge yourself.  Whether you’re climbing the Cascades or the neighborhood sledding hill, all you have to think about is where to put the bike – Acolyte will take care of the rest.  And yes, it works with a standard HG freehub body and a normal 8-speed chain.

- Chromoly steel with black oxide finish - 1.37" x 24tpi right hand thread - Requires a cog lockring (sold separately) - Compatible with 1/8-inch chains

- High-performance gear combinations provide superior rider choice - Hub body to fit a variety of bikes from MTB to road - Model Number: CS-HG800-11 - Series: Shimano - Average Weight: 335 grams

- Lightweight Design - Steel rings with engineering polymer spacers - Nickel finish - 7 Speed compatible - Weight - 248g

The Shimano SLX CS-M7100 12-speed cassette is optimized with rider-tuned gear combinations for MTB excellence. - Advanced shifting performance provides the confidence to enjoy any trail - Light and stiff construction reduces cassette inertia resulting in faster acceleration and increased chain security - HYPERGLIDE+ technology provides better chain engagement, stronger retention, and smoother pedaling with greater power and confidence over rapidly changing terrain - Designed with a Shimano Micro Spline body that features smaller and more widely distributed splines to limit cog damage on freehub - The CS-M7100 cassette meets durability requirements for E-MTB applications - Cassette Body Type: Shimano Micro Spline - Drivetrain Speeds: 12 - Range: 10-45 - Designed for ebike: Yes - Color: Silver/Black - Defined Color: Silver

Gates Carbon Drive CDX:EXP Rear Sprockets for Rohloff are made of sturdy stainless steel and are perfect for global trekking, competitive racing, or rugged off-roading. - Rohloff - Splined mounting style - Stainless steel construction - 11mm pitch - Sprockets require the Rohloff Splined Carrier 'L' which secures the sprocket using a threaded lock-ring

SRAM's 1070 10-Speed Cassette is a great choice. It's constructed of light and durable materials and boasts SRAM's PowerGlide tooth profiles and shift ramps for quick and positive gear changes every time. This trick cassette also sports a semi-spider construction for a maximum stiffness-to-weight ratio, a lightweight aluminum lockring, and is available in myriad configurations to suit all your riding. There are even models with 36-tooth largest cogs for super-easy climbing.

- CNC machined CrMo 5/64" cog with 7mm thick Hyperglide-spline, 9sp chain compatible - Extra wide spline interface prevents cog from deforming freehub body splines - Size: 5/64"

- Steel - 7-speed

Claris HG50 cassettes ensure a durable and low maintenance system that's easy-to-operate, with accurate and light-action shifting for Shimano 8-speed drivetrains. - Nickel plated finish for corrosion resistance - Steel lock ring - MODEL NO: CS-HG50-8 - SERIES: SHIMANO CLARIS R2000 Series - Compatible chain: CN-HG71 - Speeds: 8-speed - Type: HG

Dimension Freewheels are excellent drivetrain component replacements. With smooth shifting performance and durable construction, they'll help breathe new life into older bikes. - A must-have in any bicycle service department - One-piece design - Shimano index compatible - Works with most friction shifters - Suitable for use with e-bike drivetrains

High-strength steel cassette for Shimano MTB. Shimano HG hub body compatible. Features: - 8-speed, 11 – 42T, 11 – 34T, 11 – 32T - Nickel-plated steel cogs (cogs larger than 40T are finished black)

The XX SL Eagle T-Type 12-Speed 10-52t cassette is a major reason why Eagle Transmission offers one of the best-ever inboard and outboard shifting performance under load. Thanks to its full X-SYNC design, the harder you pedal, the better it shifts. This is the lightest Eagle cassette SRAM has made, as well as, their our most precise and long lasting. Its new-gen features a fully machined, hardened steel X-Dome architecture for gears 1-9 and an ultra-lightweight, all-aluminum Spider Cog for gears 10-12. Engineered as integrated and interdependent transmission components, the XX Eagle Transmission Cassette and derailleur contact directly, ensuring perfect alignment on every bike. - From its massive 520% gear range, the 52 tooth cog steps down with improved gear progression with 44 and 38 tooth cogs in the low end (compared to the Eagle drivetrain 10-52-tooth cassette) - New-gen design is SRAM's lightest 10-52t cassette due to the ultra-lightweight, all-aluminum Spider Cog - 55mm chainline compatibility for more moderate chain angle, longer wear and greater precision - Utilizes well accepted and broadly available XD driverbody - Featuring a clearly marked Setup Cog for simple and fool-proof installation - Not suitable for E-MTB

Origin-8's Ultim8 Single Speed Cassette Cog lets you have your ride any way you like it. This handy cog is dual use — a single speed cog that fits over a Shimano/SRAM freehub body or a fixed cog that bolts on in place of a 6-bolt brake rotor. A wide, zero-flex base design made of forged chromoly steel provides instant power transfer. Enjoy the Ultim8 ride whichever way you like it.

- CNC CrMo cogs to Fit the DJD-Bush drive rear hub drivers - Size: 1/8-inch