Riser

TruVativ is proud to announce the TRUVATIV CoLab Series, a collection of bars specifically engineered to match the demands of each signature athlete's discipline and riding style — and to enhance each rider's cockpit interface. - Upsweep: 5° - Backsweep: 9° (760mm bars) - Backsweep: 7° (all other bars)

- Economical 6066 aluminum alloy mountain handlebar - 800mm width - 3 rise options - Back sweep: 7° - 310-350g (Depending on rise dimension)

- AL7050-T6 tubular alloy construction - 35mm oversized clamp diameter - 800mm width - 7°/8° back sweep (Depending on rise dimension) - 5° upsweep - ISO-Mountain safety certified - 290-335g (Depending on rise dimension)

- AL6066-T6 tubular alloy construction - 35mm oversized clamp diameter - 800mm width - 7°/8° back sweep (Depending on rise dimension) - 5° upsweep - ISO-Mountain safety certified - 290-335g (Depending on rise dimension)

- The original Chromag bar - Used from XC to DH, the OSX is Chromag's most versatile option - 31.8mm clamp Specs: - Rise: 25mm - Handlebar Width: 800mm - Stem Clamp Diameter: 31.8mm - Handlebar Material: Aluminum - Upsweep: 5 degrees - Backsweep: 8 degrees

- Unidirectional carbon fiber riser bar with 35mm stem clamp area - Downhill strength with 25% weight savings compared to aluminum

- Full UD carbon construction - Textured surface at bar clamp and grip areas - 35mm oversized clamp diameter - 800mm width - 7° back sweep - 5° upsweep - ISO-Mountain safety certified - 225g

Your favorite bars just got bigger, wider, and lighter, Go figure? The magic of 35 — believe the hype! Increasing the bar diameter to 35mm allowed Race Face to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness, strength and performance Race Face bars are known for. A wider rise range to perfectly tune your fit. From ultra low 10mm rise to super high 35mm rise - Race Face's lowest and highest rises yet, with the much-loved 20mm rise rounding out the 3 rise options. The SIXC 35 bar also expands to an 800mm width (Can be trimmed down to 750mm) for hyperspeed control, can you handle it? - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - Sweep: 8-deg back, 5-deg up

Race Face Atlas riser handlebar with an anodized, shot-peened finish. - Aonodized, shot-peened finish - Cold-drawn and butted proprietary AirAlloy aluminum tubing - 4 degree upsweep

Chrome plated long-horn style design.

Unmatched comfort and unquestionably superior vibration dampening properties. The Burgtec Ride Wide Carbon Enduro Handlebars is built to take a beating. - Uni-Directional Carbon - 800mm width - 35mm bar clamp - 20mm or 30mm rise - 9 degree backsweep - 5 degree upsweep - Weight: 258g

Our Milhouse Handlebar has the distinction of being the first and only of its kind: A full carbon moto-inspired riser bar. Featuring a 16-degree backsweep and 8-degree upsweep for comfort and control, it's tested and approved for getting rad on the roughest terrain. A statement piece for custom builders and upgraders alike, the Milhouse is equally at home on klunkers, bikepacking rigs, singletrack steeds, or simply cruising the streets with style. Trimmable ends marked with easy-to-read graphics allow you to dial in your fit for maximum confidence wherever the trail takes you. - Unidirectional carbon fiber construction - Trimmable ends, made easy with graphic markings - No rider weight limit - ASTM Condition 3 – For rough off-road riding and jumps less than 24" - 90mm clamping area to fit Salsa Anything Cradle - 31.8mm clamp, 70mm rise, 16-degree backsweep, 8-degree upsweep - 825mm wide - Weight: 288g

Your favorite bars just got bigger, wider, and lighter, Go figure? The magic of 35—believe the hype! Increasing the bar diameter to 35mm allowed Race Face to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness, strength and performance Race Face bars are known for. The ATLAS 35 bar also expands to an 800mm width (Can be trimmed down to 750mm) for hyperspeed control, can you handle it? - Proven design and durability of the Race Face Atlas bar, with increased stiffness and reduced weight of the 35mm bar platform - Requires 35mm bar clamp diameter stem - Full 800mm width that can be trimmed down to a minimum 750mm - 8 degree rearward sweep, 5 degree upward sweep

- Roomy riser bar with 25 degrees of backsweep for natural wrist position - Offers comfort without sacrificing control - Shot peened 6061 aluminum - Recommended for Bikepacking and Touring

Broc Raifrod's new signature BROC bar is built around the popular Odyssey Lumberjack XXL bar shape but uses a more narrow "pre-cut" 29" width and slightly less backsweep at 10 degrees. - 41-Thermal Lifetime Warranty - 1.8/1.3mm thick, multi-butted main tubing - Butted, traditional 7/8? crossbar for strength - Large radius bends for greater durability - Post-weld heat-treated

Whatever your adventure, Rustler handlebars are tough, durable, and comfortable. Whether you are out exploring a new trail or devouring your favorite descent, they’ll help keep you in control and ready for the terrain ahead. - Lightweight and strong 6061-T6 aluminum alloy construction - Signature 11° back sweep, 6° up sweep, 20mm rise - 800mm and 750mm width options - Graduated lines for easy trimming - 31.8mm clamp diameter with 93mm width for use with Salsa Anything Cradle and aerobars - Weight: 374g - Note: Rustler bars are not compatible with bar ends

Whisky's No.9 Riser Bar features a 25mm rise and a 5-degree upsweep to offer a slightly more upright riding position that increases control and comfort. It’s wide, sleek, and tested to the highest standards to deliver a ride you can trust mile after mile. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.

Occupying a class all its own, our Winston Handlebar is a performance carbon mustache bar loaded with versatility and flare. Featuring a 25mm rise and 73-degree backsweep, it offers compatibility with road, mountain, and bar-end controls. Pretty enough to punch up commuter rigs and sport touring bikes alike, it's built tough to handle everything from rough, off-road conditions to long rides in the country. Comfortable in both the drop and riser positions, the unique and multi-functional Winston is sure to inspire upgrades and eye-catching custom builds. - Compatible with road, mountain, and bar-end controls - Tested to ASTM 3 - 90mm clamping area to fit Salsa Anything Cradle - Can be ridden in up or down position - Unidirectional carbon fiber construction - Weight: 250g

Mountain bike terrain is bigger and burlier than ever, so why shouldn’t your components be? Our Guide 35.0 Carbon handlebar increases front-end strength and stiffness for more precise handling inputs. The carbon fiber construction keeps weight to a minimum and soaks up trail chatter. Pair these carbon mountain bike handlebars with our Guide Trail 35.0 Stem and carve, drop, pump, and jump your way down the mountain with confidence. - Bar Clamp Diameter: 35.0mm - Color: Carbon - Width: 760/800mm - Rise: 10/20/40mm - Back Sweep (deg): 8 degree - Upsweep: 5 degree - Material: Carbon

Spiral butted tubing technology is game changing tube extrusion that is more durable, stronger and less weight - 7075 heat treated spiral butted aluminum - Updated graphics and an additional 50mm rise option

- 7050 ProTaper alloy optimizes strength while reducing weight - Cut mark graphics aid in customizing fit

- Features PFL (Plastic Foam Lamination) manufacturing - PFL utilizes tiny particles and steam pressure in the lamination process to expand and shape the structure of the bars - The process uses less excess resin and fewer plys, resulting in a 15% lighter bar

A25 Alloy Riser Bar - Cut marks provide a range of width options - Textured Grit Grip finish in clamp areas eliminates over-tightening of components

Made from heat-treated aluminum, tested to Motocross safety standards Marked for custom cut length

- Cam Zink designed bars with unique upsweep and backsweep - 9.5 deg bend x 4.5 deg upsweep - Cut marks to match Zink's preferred widths for Slopestyle, Dirt Jumping, Downhill, and Trail - Made from custom gradient butted 7075 T6 aluminum - 800mm wide, 31.8mm clamp - Third party online sales strictly prohibited by manufacturer

Double butted, tapered, shot peened 6061 aluminum

The No.9 35.0 Mountain Carbon Handlebar is designed and built for the most extreme trail and all-mountain riding. The oversized stem clamp adds to front-end stiffness for precise input, while the carbon construction provides vibration damping in a lightweight and durable package. - Unidirectional carbon fiber construction - 35mm stem clamp - 8 degrees of backsweep with 5 degrees of upsweep - Trimmable ends, made easy with graphic markings - Rated to ASTM Condition 4 for extreme off-road riding

- Aluminum cruiser bar offers an upright, comfortable riding position - Rigid aluminum construction, compatible with MTB-style levers/shifters

- V2 is now 760mm in lenght with updated graphics - Designed for Trail, Enduro and XC riders and racers, the Fatbar Lite Carbon is the product of an intense and in-depth research and development program - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption - Full uni-directional (UD) carbon construction with efficient orientation and placement of the fibers to maximize strength and fine tune stiffness - UD carbon fiber layup is specific to each model and rise

- Inspired by the classic V-Cross BMX bars from the 80's - Constructed from butted 4130 Cro-Mo - 820mm width, can be cut to 720mm if desired